Lignin holds the key for maximizing value extraction from lignocellulosic biomass. This is currently hindered by the application of fractionation methods that significantly alter the lignin structure to give highly recalcitrant materials. For this reason, it can be highly beneficial to use less-severe fractionation conditions that allow for efficient extraction of lignin with retention of the β-aryl ether (β-O-4) content. Here, we present a detailed study on mild alcohol-based organosolv fractionation with the aim of understanding how to achieve a balance between efficiency of lignin extraction and the structure of the resulting lignin polymers, using walnut shells as model biomass. Monitoring different extraction conditions reveals how the structure of the extracted lignin changes depending on the extraction conditions in terms of molecular weight, alcohol incorporation, and H/G/S ratios. Moving from ethanol to n-pentanol, it was revealed that, in particular, alcohol incorporation at the benzylic α-position of β-aryl ether units not only plays a key role in protecting the β-O-4 linking motif but more importantly increases the solubility of larger lignin fragments under extraction conditions. This study shows that α-substitution already occurs prior to extraction and is essential for reaching improved extraction efficiencies. Furthermore, αsubstitution with not only bulky secondary alcohols and tertiary alcohols but also chloride was revealed for the first time and the latter could be involved in facilitating α-alkoxylation. Overall, this study demonstrates how by tuning the fractionation setup and conditions, the resulting lignin characteristics can be influenced and potentially tailored to suit downstream demands.

Lignin valorization strategies are a key factor for achieving more economically competitive biorefineries based on lignocellulosic biomass. Most of the emerging elegant procedures to obtain specific aromatic products rely on the lignin substrate having a high content of the readily cleavable β-O-4 linkage as present in the native lignin structure. This provides a miss-match with typical technical lignins that are highly degraded and therefore are low in β-O-4 linkages. Therefore, the extraction yields, and the quality of the obtained lignin are of utmost importance to access new lignin valorization pathways. In this manuscript, a simple protocol is presented to obtain lignins with high β-O-4 content by relatively mild ethanol extraction that can be applied to different lignocellulose sources. Furthermore, analysis procedures to determine the quality of the lignins are presented together with a depolymerization protocol that yields specific phenolic 2-arylmethyl-1,3-dioxolanes, which can be used to evaluate the obtained lignins. The presented results demonstrate the link between lignin quality and potential for the lignins to be depolymerized into specific monomeric aromatic chemicals. Overall, the extraction and depolymerization demonstrates a trade-off between the lignin extraction yield and the retention of the native aryl-ether structure and thus the potential of the lignin to be used as the substrate for the production of chemicals for higher-value applications. Video Link The video component of this article can be found at https://www.jove.com/video/58575/ 17. This also has precedence in organosolv extraction of lignin, which is a popular method to fractionate lignin. Many variations of this process exist, with the methods employing different temperatures, acid content, extraction times and solvents. Here, the extraction severity has a direct impact on the obtained lignin structure and thus its suitability for further valorization 19,20,21. For example, organosolv lignin produced by the ethanol based Alcell process, operated for 5 years at demonstration scale, had relatively low amount of β-O-4 linkages left as it was operated at relatively high

An unprecedented catalytic pathway for oxa-Michael addition reactions of alcohols to unsaturated nitriles has been revealed using a PNN pincer ruthenium catalyst with a dearomatized pyridine backbone. The isolation of a catalytically competent Ru-dieneamido complex from the reaction between the Ru catalyst and pentenenitrile in combination with DFT calculations supports a mechanism in which activation of the nitrile through metal-ligand cooperativity is a key step. The nitrile-derived Ru-N moiety is sufficiently Brønsted basic to activate the alcohol and initiate conjugate addition of the alkoxide to the α,β-unsaturated fragment. This reaction proceeds in a concerted manner and involves a six-membered transition state. These features allow the reaction to proceed at ambient temperature in the absence of external base.

Current lignin fractionation methods use harsh conditions that alter the native lignin structure, resulting in a recalcitrant material which is undesired for downstream processing. Milder fractionation processes allow for the isolation of lignins that are high in β-aryl ether (β-O-4) content, however, at reduced extraction efficiency. The development of improved lignin extraction methods using mild conditions is therefore desired. For this reason, a flow-through setup for mild ethanosolv extraction (120 °C) was developed. The influence of acid concentration, ethanol/water ratio, and the use of other linear alcohol co-solvents on the delignification efficiency and the β-O-4 content were evaluated. With walnut shells as model feedstock, extraction efficiencies of over 55% were achieved, yielding lignin with a good structural quality in terms of β-O-4 linking motifs (typically over 60 per 100 aromatic units). For example, lignin containing 66 β-O-4 linking motifs was obtained with an 80:20 n-propanol/water ratio, 0.18 M H2SO4 with overall a good extraction efficiency of 57% after 5 h. The majority of the lignin was extracted in the first 2 hours and this lignin showed the best structural quality. Compared to batch extractions, both higher lignin extraction efficiency and higher β-O-4 content were obtained using the flow setup.

Lignin is an abundant natural biopolymer that has the potential to act as a renewable feedstock for valuable aromatic compounds via selective catalytic depolymerization. In recent years, elegant, mild, catalytic hydrogen neutral C–O bond cleavage methodologies have been developed on model compounds yielding acetophenone derivatives. However, none of these have been reported to be effective once applied to lignin. One of the reasons for this is the highly functionalized nature of the native lignin β-O-4 motif, which is often not taken into account in the β-O-4 model compounds used for methodology development. In this work, we demonstrate the development of a stepwise modification protocol on lignin β-O-4 model compounds to overall yield a partially defunctionalized β-O-4 motif. This was achieved by making use of an α-ethoxylated β-O-4 motif that is readily available from ethanosolv extraction of lignocellulosic biomass. This specific motif allowed us to apply selective copper catalyzed aerobic oxidation and subsequent rhodium catalyzed decarbonylation of the primary hydroxyl group in the γ position. The obtained partially defunctionalized β-O-4 lignin motif allowed effective homogeneous ruthenium catalyzed hydrogen neutral C–O bond cleavage (>99% of 3,4-dimethoxyacetophenone and >99% of guaiacol). The stepwise modification strategy was extended to walnut ethanosolv lignin, demonstrating that the specific structural motifs are accessible from such a readily available lignin. Overall, this work illustrates that the structure of lignin can be strategically modified to allow access to otherwise inaccessible specific aromatic compounds via selective depolymerization methodologies.