No abstract

The rapid development of lightweight and wearable devices requires electronic circuits possessing compact, high‐efficiency, and long lifetime in very limited space. Alternating current (AC) line filters are usually tools for manipulating the surplus AC ripples for the operation of most common electronic devices. So far, only aluminum electrolytic capacitors (AECs) can be utilized for this target. However, the bulky volume in the electronic circuits and limited capacitances have long hindered the development of miniaturized and flexible electronics. In this work, a facile laser‐assisted fabrication approach toward an in‐plane micro‐supercapacitor for AC line filtering based on graphene and conventional charge transfer salt heterostructure is reported. Specifically, the devices reach a phase angle of 73.2° at 120 Hz, a specific capacitance of 151 µF cm−2, and relaxation time constant of 0.32 ms at the characteristic frequency of 3056 Hz. Furthermore, the scan rate can reach up to 1000 V s−1. Moreover, the flexibility and stability of the micro‐supercapacitors are tested in gel electrolyte H2SO4/PVA, and the capacitance of micro‐supercapacitors retain a stability over 98% after 10 000 cycles. Thus, such micro‐supercapacitors with excellent electrochemical performance can be almost compared with the AECs and will be the next‐generation capacitors for AC line filters.

Hydrogen therapy, as a star therapeutic modality, has recently acquired much attention in the field of anticancer medicine. Evidence suggests that hydrogen can selectively reduce intratumoral overexpressed hydroxyl radicals (•OH) to break the redox homoeostasis and thereby result in redox stress and cell damage. As a reactive oxygen species‐related noninvasive modality, photodynamic therapy (PDT) has been approved for varied tumor treatments clinically. For implementing tumor therapy with enhanced anticancer efficacy and attenuated side effects, here a biocompatible palladium nanocrystals‐integrated nanoscale porphyrinic metal–organic framework (NPMOF) is designed to develop a novel combined therapy modality, that is, synergistic hydrogen/photodynamic therapy. The NPMOF is employed simultaneously as the photosensitizer for PDT and as the nanocarrier to support palladium nanocrystals, which is further used as the hydrogen vehicle. The final hydrogen‐containing nanosystems exhibit a persistent reductive hydrogen release behavior and considerable light‐activated singlet oxygen (1O2) generation without mutual interference, contributing to the adequate disturbance of tumor microenvironment redox steady‐state for synergistically inducing tumor cell death. Ultimately, by coupling of tumor‐selective hydrogen therapy and PDT, the designed nanosystems realize the augmented therapeutic outcome with minimal side effects, providing a safe and efficient tumor treatment for future clinical translation.

Alternating current (AC) line filters have been widely used to smooth the leftover AC ripples on direct current voltage. Currently available commercial aluminum electrolytic capacitors (AECs) are primarily used for this application. However, the bulky volume and low capacitance of AECs have become incompatible with the rapidly developed intelligent electronic devices and industry dynamics. Supercapacitors with high specific capacitance and AC line-filtering performance could become the next-generation candidates to replace AECs for smoothing leftover AC ripples. Thus, most conventional supercapacitors behave like a resistor and not a capacitor at 120 Hz mainly because complex pore structures of electrode materials prevent the diffusion of electrolyte ions. Various electrode materials have been reported to reveal supercapacitors with AC line-filtering performance; however, the balance of high specific capacitance and an excellent filtering efficiency is a prodigious challenge. This review summarizes recently reported supercapacitors based on different types of electrode materials with AC filtering performance and attempts to develop the relationship between different influencing factors and features of functional materials.