No abstract

Two pseudohalide thiocyanate ions (SCN(-) ) have been used to replace two iodides in CH3 NH3 PbI3 , and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH3 NH3 Pb(SCN)2 I perovskite films were shown to be superior to the conventional CH3 NH3 PbI3 films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH3 NH3 PbI3 films degraded in less than 1.5 hours. Solar cells based on CH3 NH3 Pb(SCN)2 I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH3 NH3 PbI3 based cells fabricated in the same way.

Two pseudohalide thiocyanate ions (SCN−) have been used to replace two iodides in CH3NH3PbI3, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH3NH3Pb(SCN)2I perovskite films were shown to be superior to the conventional CH3NH3PbI3 films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH3NH3PbI3 films degraded in less than 1.5 hours. Solar cells based on CH3NH3Pb(SCN)2I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH3NH3PbI3 based cells fabricated in the same way.

The chemical stabilities of hybrid perovskite materials demand further improvement toward long-term and large-scale photovoltaic applications. Herein, the enhanced chemical stability of CH NH PbI is reported by doping the divalent anion Se in the form of PbSe in precursor solutions to enhance the hydrogen-bonding-like interactions between the organic cations and the inorganic framework. As a result, in 100% humidity at 40 °C, the 10% w/w PbSe-doped CH NH PbI films exhibited >140-fold stability improvement over pristine CH NH PbI films. As the PbSe-doped CH NH PbI films maintained the perovskite structure, a top efficiency of 10.4% with 70% retention after 700 h aging in ambient air is achieved with an unencapsulated 10% w/w PbSe:MAPbI -based cell. As a bonus, the incorporated Se also effectively suppresses iodine diffusion, leading to enhanced chemical stability of the silver electrodes.