No abstract

This study examines the preparation of electrically conductive polymer networks based on furan-functionalised polyketone (PK-Fu) doped with multi-walled carbon nanotubes (MWCNTs) and reversibly crosslinked with bis-maleimide (B-Ma) via Diels-Alder (DA) cycloaddition. Notably, the incorporation of 5 wt.% of MWCNTs results in an increased modulus of the material, and makes it thermally and electrically conductive. Analysis by X-ray photoelectron spectroscopy indicates that MWCNTs, due to their diene/dienophile character, covalently interact with the matrix via DA reaction, leading to effective interfacial adhesion between the components. Raman spectroscopy points to a more effective graphitic ordering of MWCNTs after reaction with PK-Fu and B-Ma. After crosslinking the obtained composite via the DA reaction, the softening point (tan(δ) in dynamic mechanical analysis measurements) increases up to 155 °C, as compared to the value of 130 °C for the PK-Fu crosslinked with B-Ma and that of 140 °C for the PK-Fu/B-Ma/MWCNT nanocomposite before resistive heating (responsible for crosslinking). After grinding the composite, compression moulding (150 °C/40 bar) activates the retro-DA process that disrupts the network, allowing it to be reshaped as a thermoplastic. A subsequent process of annealing via resistive heating demonstrates the possibility of reconnecting the decoupled DA linkages, thus providing the PK networks with the same thermal, mechanical, and electrical properties as the crosslinked pristine systems.

Both shape memory and self-healing polymers have received significant attention from the materials science community. The former, for their application as actuators, selfdeployable structures, and medical devices; and the latter, for extending the lifetime of polymeric products. Both effects can be stimulated by heat, which makes resistive heating a practical approach to trigger these effects. Here we show a conductive polyketone polymer and carbon nanotube composite with crosslinks based on the thermo-reversible furan/maleimide Diels−Alder chemistry. This approach resulted in products with efficient electroactive shape memory effect, shape reprogrammability, and self-healing. They exhibit electroactive shape memory behavior with recovery ratios of about 0.9; requiring less than a minute for shape recovery; electroactive self-healing behavior able to repair microcracks and almost fully recover their mechanical properties; requiring a voltage in the order of tens of volts for both shape memory and self-healing effects. To the best of our knowledge, this is the first report of electroactive self-healing shape memory polymer composites that use covalent reversible Diels−Alder linkages, which yield robust solvent-resistant polymer networks without jeopardizing their reprocessability. These responsive polymers may be ideal for soft robotics and actuators. They are also a step toward sustainable materials by allowing an increased lifetime of use and reprocessability.

Glycerol is a bio-based platform chemical that can be converted to a variety of bio-based chemicals via chemical conversions. We here report a catalytic co-conversion strategy where glycerol in combination...

No abstract