Numerous experimental factors are shown to significantly influence the spectra obtained when bacteria are analyzed by MALDI TOF/MS. Detailed investigation of the instrument parameters and sample preparation are all shown to influence the spectra. Of these, the preanalysis sample preparation steps incorporate the most important elements influencing the quality and reproducibility of the spectra. Some of the most important sample preparation factors include the method employed for sterilization, the type of matrix, the matrix solvent and concentration of cells in the matrix, as well as the type and concentration of acid added to the matrix. The effects of these parameters, as well as other aspects of sample preparation and the effects of several instrumental parameters on spectra are presented. Optimization and control of all experimental variables leads to a stable protocol for analysis of bacteria. The protocol employs a Nd:Yag laser and describes both sample handling and instrument conditions which consistently yield reproducible MALDI TOF mass spectra with greater than 25 peaks from both gram-positive and gram-negative bacteria.

A variety of popular instant, ground, and brewed coffees were analyzed using a modified liquid chromatography-tandem mass spectrometry (LC-MS/MS) method specifically developed for the determination of acrylamide in foods. Coffee test portions were spiked with 13C3-labeled acrylamide as an internal standard prior to their extraction and cleanup. Ground coffees (1 g) and instant coffees (0.5 g) were extracted by shaking with 9 mL of water for 20 min. Brewed coffee test portions (9 mL) were taken through the cleanup procedure without further dilution with extraction solvent. Coffee test portions were cleaned up by passing 1.5 mL first through an Oasis HLB (hydrophilic/lipophilic copolymer sorbent) solid phase extraction (SPE) cartridge and then a Bond Elut-Accucat (cation and anion exchange sorbent) SPE cartridge. The cleaned up extracts were analyzed by positive ion electrospray LC-MS/MS. The MS/MS data was used to detect, confirm, and quantitate acrylamide. The limit of quantitation of the method was 10 ng/g for ground and instant coffees and 1.0 ng/mL for brewed coffee. The levels of acrylamide ranged from 45 to 374 ng/g in unbrewed coffee grounds, from 172 to 539 ng/g in instant coffee crystals, and from 6 to 16 ng/mL in brewed coffee.

The described liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the detection of acrylamide in food entails aqueous room temperature extraction, SPE cleanup, and analysis by LC-MS/MS. The method is applicable to a wide variety of foods. [(13)C(3)]acrylamide is the internal standard. The limit of quantitation is 10 ppb (microg/kg). Data were obtained in duplicate from >450 products representing >35 different food types. The variability in analyte levels in certain food types suggests that it may be possible to reduce acrylamide levels in those foods.