PT. Adhimix Precast Indonesia is engaged in the construction sector by producing concrete and construction. Layout design is needed so that the existing land can be utilized optimally and material transfer is more effective and efficient. This can affect the distance and time of the transfer so that the cost of moving can be minimized. In practice, the company's trajectory condition only has one path (trajectory) for alternating current and crossing production lines, so it is considered inefficient to move both goods and workers, coupled with the existence of land that is not used properly, therefore improvements are needed to the production floor layout. in order to minimize the cost of moving goods and have a definite path (trajectory). Systematic Layout Planning (SLP) is a method for redesigning a layout (re-layout) based on the results of distance optimization and Material Handling Costs (OMH). The amount of OMH in the initial layout (now) is Rp. 2,614,200 with a total track distance of 39.82m and OMH in the proposed layout with a total track distance of 19.17m, the result is Rp. 1,534,200, this proves that the proposed layout can be applied because there is a decrease in total OMH by 35.44% or Rp. 926,580. PT. Adhimix Precast Indonesia bergerak di bidang pembangunan dengan memproduksi beton dan konstruksi. Perancangan tata letak diperlukan agar lahan yang ada dapat dimanfaatkan dengan maksimal dan pepindahan material lebih efektif dan efisien. Hal ini dapat mempengaruhi besar jarak dan waktu perpindahan sehingga besar biaya perpindahan dapat diminimalkan. Pada pelaksanaannya kondisi lintasan perusahaan hanya memiliki satu jalur (lintasan) untuk arus bolak balik dan persilangan alur produksi maka dianggap tidak efisien untuk dilakukan perpindahan baik barang maupun pekerja, ditambah dengan adanya lahan yang tidak dimanfaatkan dengan baik oleh karena itu dibutuhkan perbaikan pada layout lantai produksi agar dapat meminimalkan biaya perpindahan barang dan memiliki jalur (lintasan) yang pasti. Systematic Layout Planning (SLP) merupakan metode untuk membuat perancangan ulang suatu layout (re-layout) berdasarkan hasil dari optimalisasi jarak dan Ongkos Material Handling (OMH). Besar OMH pada layout awal (sekarang) adalah Rp 2.614.200 dengan total jarak lintasan 39,82m dan OMH pada layout usulan dengan total jarak lintasan 19,17m didapat hasil sebesar Rp. 1.534.200, hal ini membuktikan bahwa layout usulan dapat diterapkan karena terjadi penurunan total OMH sebesar 35,44% atau Rp.
PT Prima Kemasindo is a company that focuses on producing a variety of quality drinks, one of which is nata de coco or coconut juice. The machine used in producing this coconut juice drink is a filling machine. The amount of nata de coco production can be said to be unstable, this can be seen in the production results that there are decreases and increases every month. This study aims to analyze the level of labor productivity and what factors affect labor productivity at PT Prima Kemasindo. This study uses the partial productivity method to determine the level of labor productivity each month. The production output produced in January was 295604, in February it was 224714 and in March it was 279744. Labor productivity decreased in January by 95% (less than 100%), while February and March increased by 111% and 103%.
Penelitian ini bertujuan untuk menerapkan metode shared storage dalam mengevaluasi tata letak gudang sehingga diperoleh alternatif tata letak yang lebih efisien. Data yang digunakan pada penelitian ini adalah layout saat ini, jumlah permintaan produk, dan frekuensi aktivitas yang terjadi dalam gudang pada masing-masing produk. Berdasarkan penerapan metode shared storage dapat diusulkan tata letak gudang yang lebih baik. Dari hasil yang didapatkan, dilakukan perbaikan rak penyimpanan dari empat slot menjadi enam slot sehingga lebih menghemat penggunaan area karena produk disimpan pada rak bertingkat. Dari hasil perhitungan didapatkan penurunan kebutuhan luas lantai, yaitu untuk produk homeware 16,06%, health & beauty 15,6%, dan electronic 16,32%. Dari hasil tersebut diketahui produk homeware memiliki kebutuhan tertinggi berdasarkan jumlah permintaannya dan produk electronic mengalami penurunan luas terbesar. Oleh karena itu, penempatan produk pada gudang harus mempertimbangkan frekuensi tersebut agar terciptanya efisiensi saat transportasi.
The work system greatly affects the performance of employees until it finally results in the employee being productive or not. A good work system will provide security and comfort to employees when doing work. From this, it is expected that employees can work more actively and can achieve the targets that have been set. This study aims to identify the work system applied to the Community and Village Empowerment Service, and evaluate the work system in order to get a better system to increase productivity. Macroergonomics Analysis and Design (MEAD) approach is used to evaluate the work system with structured and systematic steps. From the results obtained, it is known that the work system implemented by the DPMD has been running effectively and efficiently in accordance with the established vision and mission. While the factors that affect productivity are the physical environment, work equipment, working conditions, and organizational systems. From the calculation of %HR Reserve and Cardiovascular Load (%CVL) the value is 56.34% while the rest time is -0.083. From these results, it is known that the rest time given is sufficient and there is no need for additional rest periods.Sistem kerja sangat mempengaruhi kinerja pegawai hingga akhirnya menghasilkan pegawai tersebut produktif atau tidak. Suatu sistem kerja yang baik akan memberikan keamanan dan kenyamanan pada pegawai saat melakukan pekerjaan. Dari hal tersebut diharapkan pegawai bisa bekerja lebih aktif dan dapat mencapai target yang telah ditetapkan. Penelitian ini bertujuan mengidentifikasi sistem kerja yang diterapkan pada Dinas Pemberdayaan Masyarakat dan Desa, serta mengevaluasi sistem kerja tersebut guna mendapatkan sistem yang lebih baik untuk dapat meningkatkan produktivitas. Digunakan pendekatan Macroergonomics Analysis and Design(MEAD) untuk mengevaluasi sistem kerja dengan langkah terstruktur dan sistematis. Dari hasil yang didapatkan, diketahui sistem kerja yang diterapkan oleh DPMD sudah berjalan efektif dan efisien sesuai dengan visi dan misi yang sudah ditetapkan. Sedangkan faktor-faktor yang mempengaruhi produktivitas yaitu ada lingkungan fisik, peralatan kerja, kondisi pekerjaan, dan sistem organisasi. Dari perhitungan % HR Reserve dan Cardiovaskuler Load (% CVL) di dapatkan nilai 56,34% sedangkan waktu istirahat -0,083. Dari hasil tersebut diketahui waktu istirahat yang diberikan sudah cukup dan tidak perlu adanya penambahan waktu istirahat.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.