<p>Telah dilakukan penelitian tentang lempung alam (bentonit) yang diaktivasi dengan berbagai variasi konsentrasi H<sub>2</sub>SO<sub>4</sub>, dan dengan proses interkalasi menggunakan larutan Al<sub>2</sub>O<sub>3</sub>.H<sub>2</sub>O. Tujuan dari penelitian ini adalah untuk menentukan konsentrasi optimum untuk aktivasi lempung, berdasarkan karakter persentase montmorillonite dan keasaman total. Hal ini juga didukung oleh karakterisasi setelah proses interkalasi, yaitu karakter luas permukaan spesifik, volume pori total, radius pori rata-rata dan kandungan aluminium. Analisis persentase-Montmorilonit dilakukan dengan menggunakan difraksi sinar X; keasaman total ditentukan secara gravimetri; luas permukaan spesifik, volume pori total, dan jari-jari pori rata-rata diukur dengan S<em>urface</em><em> Area Analyzer</em> NOVA dan kandungan aluminium ditentukan oleh Analisis Aktivasi Neutron.</p>Hasil penelitian menunjukkan bahwa aktivasi optimum pada konsentrasi H<sub>2</sub>SO<sub>4</sub> 1,5 M mempunyai persentase montmorillonite optimum (91.335%) dan nilai keasaman meningkat 193.955% dari nilai keasaman bentonit alam. Karakter fisik dan kimia setelah interkalasi juga menunjukkan bahwa terjadi peningkatan kadar aluminium (57,540%), luas permukaan spesifik (150,586%), volume total pori (73,236%) dan keasaman Total (203,504%) dari bentonit alam. Rerata jejari pori mengalami penurunan 10,274% setelah aktivasi dan penurunan 30,868% setelah proses interkalasi.
ABSTRAKPenelitian tentang aktivasi dan pilarisasi lempung alam (bentonit) telah dilakukan. Lempung dikarakterisasi dengan APN, XRD, N2 adsorpsi isoterm,FTIR, dan keasaman total diukur menggunakan metode adsorpsi ammonia. Hasil penelitian menunjukkan bahwa aktivasi optimum terjadi pada konsentrasi H 2 SO 4 sebesar 1,5 M dengan persentase montmorillonite optimum sebesar 91,34% dan nilai keasaman meningkat 193,96% dari nilai keasaman bentonit alam. Karakter fisik dan kimia setelah interkalasi juga menunjukkan bahwa terjadi peningkatan kadar aluminium (57,54%), luas permukaan spesifik (150,59%), volume total pori (73,24 %) dan keasaman Total (203,50 %) dari bentonit alam. Rerata jejari pori mengalami penurunan 10,27 % setelah aktivasi dan penurunan 30,87 % setelah proses interkalasi.Kata kunci: Aktivasi, interkalasi, lempung, pemilaran. ABSTRACTThe research on the activation and pillarization natural clay (bentonite) has been performed. Clays were characterized by APN, XRD, N 2 adsorption isotherms, FTIR, and the total acidity was measured using ammonia adsorption methods. The results showed that the optimum activation occurs at concentrations of 1.5 M H 2 SO 4 with montmorillonite optimum percentage of 91.34% and 193.96% of the increased acidity value of the value of bentonite natural acidity. Physical and chemical characters after intercalation also showed that increased levels of aluminum (57.54%), specific surface area (150.59%), total pore volume (73.24%) and total acidity (203.50%) of bentonite natural. The mean pore decreased 10.27% after activation and decreased 30.87% after the intercalation process.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.