In this article, we demonstrate a rapid and facile method for in-situ growth of metal-organic framework (MOF) films on Cu or Zn metal substrates by sonochemical techniques. The substrates were first treated with a strong oxidizing agent to convert the metal to the corresponding metal hydroxide. Ultrasonic irradiation provided the energy to drive the reaction between the metal ion sources and organic ligands. Four MOF films (Cu-BTC, Cu-BDC, ZIF-8 and MOF-5) were successfully fabricated by this approach. The produced films were characterized by scanning electron microscopy and X-ray diffraction analysis. The effects of organic ligand concentration and ultrasonic irradiation time on MOF film synthesis were also systematically investigated. The rapid and facile fabrication method presented in this article could serve a new route to grow MOF films on various gas sensor surfaces. Of the MOF films, ZIF-8 film was tested as a potential methane sensor.

The encapsulation of ZnQ into ZIF-8 allows fluorescent and colorimetric detection of nitroaromatic explosives, such as 2-4-6 trinitrotoluene (TNT). These are dangerous materials that pose safety and environmental risks.

In this article, we demonstrate a high-performance hydrogen sensor under ambient conditions by growing a Cu-BTC/polyaniline (PANI) nanocomposite film on a quartz crystal microbalance (QCM) using intense pulsed light. The QCM was first sputter coated with a 200 nm thin layer of copper. The copper layer was then oxidized by sodium hydroxide and ammonium persulfate. A solution containing the organic ligand (BTC) and PANI was then dropped and dried on the copper hydroxide surface of a QCM with intense pulsed light which resulted in Cu-BTC/PANI nanocomposite film on a QCM. The gas sensing performance of the Cu-BTC film and Cu-BTC/PANI composite film was compared under ambient conditions. It was found selectivity and sensitivity of the Cu-BTC/PANI nanocomposite film to hydrogen were significantly improved. In addition, a fast response time (from 2 to 5 seconds), operation at room temperature even in the presence of high relative humidity (up to 60%), good repeatability were achieved with the Cu-BTC/PANI nanocomposite film-grown QCM sensor.

Metal–organic frameworks (MOFs) are a group of porous materials that display potential in the elimination of toxic industrial compounds (TICs) from polluted water streams. However, their applications have so far been held up by issues due to their physical nature and cost. In this study, activated carbon (AC) is modified with an Fe-based MOF, iron terephthalate (Fe-BDC). A facile and cost-effective impregnation method is used for enhanced removal from aqueous solutions. The new adsorbent is characterized by SEM, FTIR, PXRD, and BET. The composite displays excellent uptake of Cr (VI) when compared to un-impregnated AC with a maximum monolayer adsorption capacity of 100 mg·g−1. The experimental data shows a high correlation to the Langmuir adsorption model. The adsorption kinetic study reveals that the adsorption of Cr (VI) to Fe-BDC@AC obeys the pseudo-first-order equation. The composite shows high reusability after five cycles and high adsorption rates reaching equilibrium in just 50 min. Such properties make the nanocomposite promising for water decontamination on larger scales compared to powder-based alternatives, such as individual MOF crystals.

2-chloroethyl ethyl sulfide (CEES) is a simulant for the chemical warfare agent, bis(2-chloroethyl) sulfide, also known as mustard gas. Here, we demonstrate a facile and rapid method to synthesize a...