comercialmente há muitos anos, os nanomateriais manufaturados foram recentemente reconhecidos como uma nova classe de materiais, sendo que alguns tipos têm demonstrado particularidades interessantes e propriedades promissoras, em especial na área farmacêutica.O conceito de nanotecnologia em aplicações farmacêu-ticas, mais especificamente na liberação de fármacos, está baseado na produção de nanopartículas que contêm molé-culas do fármaco a serem depositadas exclusivamente no órgão alvo com a vantagem de serem inativas. Neste contexto, destaca-se a busca por sistemas terapêuticos capazes de modular de forma satisfatória a cinética, o tempo e o local de liberação de um fármaco, minimizando ao mesmo IntroduçãoA nanotecnologia está relacionada às estruturas, propriedades e processos envolvendo materiais com dimensões numa escala de 1 a 300 nm, valores estes, considerados elevados quando comparados a moléculas simples, porém pequenos em relação ao comprimento de onda da luz visível [1] . Dentre os materiais nanoestruturados podem ser encontrados nanopartículas, nanocristais, nanofios, nanotubos, nanocompósitos. O grande diferencial destes materiais é a potencialização de propriedades físicas e químicas dos produtos obtidos a partir dos mesmos. Enquanto alguns materiais naturais de estruturas nanométricas são empregados Resumo: Em estudo anterior foi utilizado o conceito de nanocompósito para aplicações farmacêuticas, mais especificamente na liberação controlada de fármacos. Um nanocompósito polímero (PVP K-30) -silicato lamelar (argila organofílica, OMMT) foi preparado por solução, em diclorometano, e a sua avaliação como excipiente farmacêutico foi realizada com sucesso. Neste trabalho, um estudo do tempo reacional foi realizado (12, 48 e 72 horas), tendo sido observado, através de difração de raios X (DRX), um valor de espaçamento interlamelar máximo em 12 horas. Este resultado motivou um estudo mais detalhado a respeito deste processo de intercalação. Para tal, e em razão da solubilidade da PVP, foi avaliado, também, um sistema mais simples, com a argila sódica (MMT), não tratada, em água. Em ambos os sistemas, PVP-OMMT e PVP-MMT, foi realizada uma varredura de tempos reacionais (de 15 minutos a 72 horas), nas proporções de 2:1, 1:1 e 1:2, para caracterização por DRX. As análises sugerem a formação dos nanocompósitos em até 1 hora de reação, resultado atribuído à estrutura amídica da PVP, capaz de estabilizar as lamelas negativamente carregadas da argila. Palavras-chave: PVP K-30, argila sódica, argila organofílica, nanocompósito. Preparation and Reactional Evaluation of Formation of PVP K-30 -Montmorillonite (Natural and Organophilic) by X Ray DiffractionAbstract: In a previous study the concept of nanocomposite for pharmaceutical applications, more specifically in drugs´ release, was used. A polymer-layered silicate nanocomposite (PLN) of PVP K-30 -organophilic MMT (OMMT) at a 2:1 ratio was produced in dichloromethane solution and successfully evaluated as a pharmaceutical adjuvant. In this study the influenc...
Resumo: Foi preparada uma argila modificada com cloreto de cetilpiridíneo a partir da argila sódica por troca de cátions em solução. Foi avaliada a quantidade de agente de modificação em relação à argila sódica e o tempo reacional. Os materiais obtidos foram caracterizados por difração de raio X (XRD), análise termogravimétrica (TGA) e ressonância magnética nuclear (RMN) de baixo campo. Após a caracterização foi confirmada a modificação da argila e, também, foi verificado que o produto obtido pode ser empregado na preparação de nanocompósitos de PVC, considerando que o início da degradação do material preparado ocorreu em temperatura superior às comumente utilizadas no processamento do polímero. A adição da argila modificada apresentou uma dispersão adequada no PVC e manteve o início da degradação do material em temperatura compatível com o processamento do polímero, gerando um nanocompósito com parte esfoliada e intercalada. Palavras-chave: Montmorilonita, PVC, XRD, RMN de baixo campo. Preparation of Modified Clay with Cetylpyridinium Chloride and Evaluation of Their Interaction with PVCAbstract: A modified silicate with cetylpyridinium was prepared from sodium clay with cation exchange in solution. The amount of modification agent for clay and the reaction time were evaluated. The materials produced were characterized using X ray diffraction (XRD), termogravimetric analysis (TGA) and low field nuclear magnetic resonance (NMR). The formation of new organic clay was confirmed, which was introduced in PVC for the formation of nanocomposites. The beginning of degradation of the new clay occurred at temperatures higher than commonly used in the processing of PVC. The nanocomposites were partially exfoliated and partially intercalated. Keywords: Montmorillonite, PVC, XRD, low field NMR. IntroduçãoO poli(cloreto de vinila) (PVC) é um dos termoplásticos mais consumidos no mundo, sendo considerado o mais versátil dentre os plásticos. A grande versatilidade do PVC se deve as suas propriedades e também a sua adequação aos mais variados processos de transformação. Uma vez que a resina é atóxica e inerte, a escolha de aditivos com essas mesmas características permite a fabricação de filmes para embalagens de alimentos e farmacêuticas, além de produtos médico-hospitalares [1,2] . Uma característica que limita muito o processamento do PVC é o fato desse polímero ser menos estável que muitos materiais plásticos, sofrendo um processo de degradação devido ao calor, oxigênio, luz e energia mecânica [3] . Pode-se, também, preparar compósitos com outros polímeros para se melhorar e/ou modificar as propriedades mecânicas e térmicas do PVC, como blendas com o polietileno [3] e policloropreno [4] . Os compósitos podem ser definidos como materiais que contém duas ou mais substâncias combinadas, produzindo um material com propriedades funcionais e estruturais diferentes daquelas dos constituintes individuais. São heterogêneos e multifásicos, sendo um componente descontínuo (estrutural ou de reforço) que fornece resistência ao material,...
A nanotecnologia está relacionada às estruturas, propriedades e processos envolvendo materiais com dimensões numa escala nanométrica. O conceito de nanotecnologia em aplicações farmacêuticas, mais especificamente na liberação de fármacos, está baseado na produção de nanopartículas que contêm moléculas do fármaco a serem depositadas exclusivamente no órgão ou tecido alvo com a vantagem de serem inativas. Neste contexto, o presente trabalho busca estudar a utilização de uma organoargila, previamente modificada com octadecilamina, viscogel B8, como matriz de liberação controlada de fármacos por meio da reação de intercalação desta argila com PEG 6000 e MEG, comparando-se os resultados obtidos com um derivado previamente obtido da intercalação desta argila com PVP K-30. Estes materiais têm como diferencial a reunião de diferentes aspectos de funcionalidade, possibilitando se obter excipientes de liberação modificada de propriedades mistas.
Resumo: Foram produzidas reações, via solução, PVP-bentonita (natural e organicamente modificada) nas quais foi estudada a influência das variáveis: tempo reacional (15, 30, 45 minutos, 1, 24, 48, 72 horas), proporção polímero-argila (2:1, 1:1, 1:2) e massa molar média (PVP K-30, PVP K-90). Com o auxílio de técnicas de difração de raios X (XRD), infravermelho com transformada de Fourier (FTIR) e análise termogravimétrica (TGA) foi possível não somente elucidar a formação de nanocompósitos intercalados como também o seu processo reacional. Palavras-chave: PVP, bentonita, nanocompósito polímero-silicato lamelar, intercalação. Study of PVP- IntroduçãoAinda hoje, não há uma definição realmente adequada para um material compósito. Reinhart e Clements (apud Botelho, 2006) [1] definem um compósito como uma combinação macroscópica de dois ou mais materiais distintos, havendo uma interface reconhecível entre eles. Nesta combinação, os constituintes retêm suas identidades. Deste modo, os compósitos têm, tipicamente, uma ou mais fases descontínuas, usualmente mais rígida e resistente, envolvidas por uma fase contínua, ou matriz. Os nanocompósitos são materiais modificados, da mesma forma do que os compósitos, no entanto, diferentemente destes, aqueles contêm pelo menos um dos componentes do reforço ou carga de dimensões nanométricas [2] . A nanotecnologia está relacionada a estruturas, propriedades e processos envolvendo materiais com dimensões numa escala de 1 a 100 nm [3] , valores estes considerados elevados quando comparados a moléculas simples, porém pequenos em relação ao comprimento de onda da luz visível. Os componentes de um nanocompósito podem ser de natureza inorgânica/inorgânica, orgânica/orgânica, ou, ainda, inorgânica/orgânica, de propriedades mais diferenciadas [4] . Dentre as diferentes fontes de nanomateriais de origem natural, destacamse os argilominerais, os quais apresentam inumeráveis aplicações e ampla diversidade de uso, o que se deve à facilidade com que esses materiais são modificados [5] . Nos últimos anos, os nanocompósitos poliméricos têm emergido como uma nova classe de materiais revolucionários, por demonstrarem incremento em uma série de propriedades [6,7]
Modified clays were intercalated with benzethonium chloride and benzalkonium chloride by exchanging the sodium ions. The organoclays obtained were characterized by X-ray diffraction (XRD); thermogravimetric analysis (TGA) and low field nuclear magnetic resonance (NMR), through proton spin-lattice relaxation time measurements (T1H). From the characterization data, the formation of organically modified clays was confirmed. These products can probably be used to prepare PVC nanocomposites with superior processing characteristics due to better chemical structure of clay surfactants.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.