The annealing procedure favors the hydrogen desorption, improving film characteristics.When a RF power of 50W is used, films are obtained with properties that vary slightly, notwithstanding changes in the gas ratio. These films are thermally stable. This is very attractive for III-V device technology.In conclusion, ranges of PECVD deposition parameters, which are suitable for III-V technology, have been observed. In any case the specific operating parameters should be chosen according to the device structure (planar, ridge, mushroom, etc.) and according to the device performances that should be optimized (emitters, detectors).
for HighCamcorders record motion video while electronic still cameras and computer cameras capture still images. Most camcorders are NTSC resolution, analog-based systems. A megapixel progressive scan motion and photographic still system is described in this paper which uses a highresolution color CCD imager and the analog signal processing in Kodak Digital Science TM KASP series integrated circuits. For maintaining the 30 frames per second (fps) the sensor is clocked out at 37.5 MHz. The video output from a CCD sensor is in the shape of a high-frequency digital clock whose reset pedestal is embedded with KTC noise. Hence a correlated double sample and hold (CDSIH) circuit can give the difference between the reset pedestal and the video for every pixel and thus eliminate the KTC noise and 1/f noise. Every camera using a CCD sensor will have a CDSIH. Most cameras implement CDS/H at 40 MHz in the form of a filter or use general purpose track and hold amplifiers. Both options are bulky, expensive, and power hungry. Kodak has developed a monolithic 40 MHz analog signal processor (KASP44OG) with CDS/H using QuickTile standard cell architecture of Tektronix, Inc., using the Quickic tool set and the TSPICE analog circuit modeling tools. The paper describes the high-resolution progressive scan sensor, data rate speed issues, and present implementation methodologies of CDS/H at 40 MHz and compares the power, performance and cost savings by using KASP-140G.Kodak has designed four different analog signal processing chips with varying levels of power consumption and speed for analog signal processing of video output of CCD sensors. The analog application specific integrated circuits (ASICs) have been characterized for noise, clock feedthrough, acquisition time, linearity, variable gain, line rate clamp, black muxing, affect of temperature variation on chip performance, and droop. The ASP chips have met their design specifications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.