Resumo -O processo de tratamento para produção de água potável gera resíduos em algumas etapas do processo de tratamento principalmente no decantador (lodo). Este lodo é formado durante o processo de coagulação/floculação, com o auxílio de coagulantes químicos (PAC-Policloreto de Alumínio) ou naturais (Moringa oleifera) que vêm sendo investigados intensamente. Pela ABNT NBR 10.004 este lodo é classificado como "resíduo sólido", portanto deve ser tratado e disposto conforme exigência dos órgãos reguladores. O objetivo deste trabalho foi classificar o lodo formado, no processo de coagulação/floculação, utilizando PAC e Moringa como coagulantes de acordo com o conjunto de normas ABNT NBR 10.004 ("Resíduos sólidos -Classificação"), ABNT NBR 10.005 (Procedimentos para obtenção de extrato lixiviado de resíduos sólidos") e ABNT NBR 10.006 ("Procedimentos para obtenção de extrato solubilizado de resíduos sólidos") segundo a análise de metais dos extratos lixiviado e solubilizado dos lodos. Os ensaios de lixiviação e solubilização dos lodos indicam que os lodos de PAC e Moringa são classificados como resíduos CLASSE II A, Não perigoso -Não inerte. Mesmo com o uso de um coagulante natural, o lodo pode possuir uma alta concentração de metais pesados em sua composição, pois estes possivelmente são oriundos da água bruta utilizada no tratamento. Portanto os lodos devem ser dispostos de modo adequado, de forma a não causar danos ao meio ambiente e aos seres humanos. Palavras-chave:Lodo, coagulante natural, classificação, resíduos sólidos.Abstract -The drinking-water treatment plants, generally, generates waste in some stages of the treatment, mainly in the settling vessel (sludge). This sludge is formed during the coagulation/flocculation stage, with aid of chemical coagulants (PAC -Poly Aluminium Chloride) or natural (Moringa oleifera) that currently are being intensively researched. According to ABNT NBR 10004 this sludge is classified as "solid waste" and therefore must be previously classified in order to be disposed of adequately. The classification of the sludge formed in coagulation/flocculation process, using PAC and Moringa as coagulant, is investigated. This was done according to the set of regulations ABNT NBR 10004 ("Solid Waste -Classification"), ABNT NBR 10005 ("Procedures for obtaining leached extract of solid waste") and ABNT NBR 10006 (2004) ("Procedures for obtaining soluble extract of solid waste") based on metals analysis of sludge leached and solubilized extract. The sludge leaching and solubilization tests indicate that PAC and Moringa sludge are classified as Class II A, non-hazardous and non-inert waste. Even with the use of a natural coagulant, the sludge can have a high concentration of heavy metals in its composition, as these are, probably, from raw water used in the treatment. Therefore, the sludge must be disposed adequately, as not to cause damage to the environment and humans.
Durante o processo de tratamento da água bruta para a produção de água potável, há a geração de resíduo na etapa de decantação, denominado lodo, que possui como principais características a alta concentração de matéria orgânica e metais pesados, podendo desta forma causar riscos ao ambiente quando descartado de maneira inadequada. O presente trabalho teve como objetivo principal a incorporação de diferentes porcentagens deste lodo na fabricação de painéis de madeira aglomerada, como uma forma de disposição final adequada para o lodo de tratamento de água e também para a maravalha proveniente do beneficiamento da madeira de pinus. Após a caracterização físico-química do lodo e partículas de madeira os painéis confeccionados foram submetidos a ensaios físicos de densidade, teor de umidade, absorção de água e inchamento em espessura segundo a norma brasileira ABNT NBR 14.810-3 (2006). O melhor tratamento encontrado foi com incorporação de 30% de lodo de ETA e utilizando a maior porcentagem de resina de ureia-formaldeído (UF) 16%, este painel apresentou um valor de densidade de 520,15 kg m-3. Os resultados mostraram que a incorporação do resíduo em painéis de madeira aglomerada é uma opção promissora como uma forma de disposição final para este resíduo, desenvolvendo assim um subproduto e incentivando desta forma o desenvolvimento sustentável, colaborando com o meio ambiente.
ABSTRACT. Considering the increased generation of solid waste and the difficulty of proper final disposal, it is of utmost importance to study the reuse of solid waste, seeking a beneficial alternative for the population and the environment. This study aimed to produce wood particle boards incorporated with different percentage of waste from the manufacture of labels and tags, commonly known as paper shavings, containing biaxially oriented polypropylene (BOPP), aiming its reuse. Physical, chemical and mechanical tests were performed. The difference in density between the materials used to manufacture the boards influenced the production process as well as the amount of waste added. Values of moisture content and thickness swelling remained within the range set by the regulations. The results for water absorption analysis are in agreement with those in the literature on the incorporation of different types of waste in the boards. According to our findings, it was observed the importance of a homogeneous mixture of the materials, and pH control. The incorporation of waste containing BOPP into particle boards may be a promising disposal alternative for this waste, given the development of a byproduct that encourages sustainable development.Keywords: incorporation, paper scrap, particle board, analysis.Estudo das propriedades físicas, químicas e mecânicas de painéis de madeira aglomerada com inserção de resíduos contendo polipropileno biorientado RESUMO. É de grande importância o estudo do reaproveitamento dos resíduos sólidos, devido ao aumento de sua geração e dificuldade de disposição final adequada, a fim de buscar uma alternativa benéfica para a população e para o ambiente. O objetivo principal deste trabalho foi a incorporação de diferentes porcentagens de resíduos provenientes da fabricação de rótulos e etiquetas, conhecidos como aparas, contendo polipropileno biorientado (BOPP) em painéis de madeira aglomerada, visando seu reaproveitamento. Foram realizados testes físicos, químicos e mecânicos. Observou-se que a diferença de densidade entre os materiais influencia no processo de produção dos painéis, assim como a quantidade de resíduo adicionada. As análises de teor de umidade e de inchamento em espessura mantiveram-se dentro do estabelecido pelas normativas. Os resultados encontrados para a análise de absorção de água estão de acordo com os apresentados em literatura, para incorporação de diferentes tipos de resíduos nos painéis. De acordo com os resultados obtidos pôde-se observar a importância de uma mistura homogênea dos materiais, e o controle do pH. A incorporação de resíduos contendo BOPP em painéis de madeira aglomerada pode ser uma alternativa promissora de disposição final para este resíduo, pois desenvolve um subproduto e incentiva o desenvolvimento sustentável.Palavras-chave: incorporação, aparas, aglomerado, análises.
ABSTRACT.This study aimed to demonstrate a sustainable alternative to the use of residues by treating industrial laundry wastewater, thereby making them useful in producing wood particleboards as furniture. For this purpose, physical, chemical, and mechanical tests were carried out in order to characterize the product, which showed acceptable characteristics for commercial use as elements in the furniture industry.
Este artigo teve como objetivo apresentar evidências da alfabetização científica (AC) de ilustrações gráficas e discursivas estruturadas por alunos do 2o ano do Ensino Médio, após aplicação de uma sequência didática (SD) denominada “Qual a Química que você respira?” elaborada na perspectiva ciência, sociedade, tecnologia e ambiente (CTSA). A SD foi organizada nos moldes dos três momentos pedagógicos (3MP) e aplicada em 4 encontros presenciais de 2 horas/aulas cada. Foi proposto como atividade avaliativa aos alunos que elaborassem uma história que contemplasse o conteúdo de termoquímica visto em sala. Para a análise qualitativa foi utilizada a análise de conteúdo de Bardin (2011) sendo as categorias pré-estabelecidas a partir dos indicadores de AC propostos por Sasseron e Carvalho (2008; 2010). A abordagem utilizada oportunizou um ambiente de reflexão a partir da observação das relações dinâmicas entre os elementos de CTSA no contexto escolar, com a formação cidadã dos educandos, pois o desenvolvimento do pensamento crítico favoreceu a elaboração de propostas para a solução de problemas de âmbito social e ambiental, evidenciadas pelas histórias criadas. Constatou-se que os estudantes foram capazes de relacionar conceitos de Química trabalhados na SD aos efeitos da poluição atmosférica no meio ambiente e na saúde.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.