DESEMPENHO OPERACIONAL DO CONJUNTO TRATOR SEMEADORA ADUBADORA DE FLUXO CONTÍNUO EM FUNÇÃO DA PRESSÃO DE INFLAÇÃO DOS RODADOS E VELOCIDADE DE DESLOCAMENTO MARCELO QUEIROZ AMORIM1, FRANCISCA EDCARLA DE ARAÚJO NICOLAU2, CLICE DE ARAÚJO MENDONÇA3, PAULO RICARDO ALVES DOS SANTOS4, CARLOS ALESSANDRO CHIODEROLI5 1Doutorando em Engenharia Agrícola, Departamento de Engenharia Agrícola, Universidade Federal do Ceará-UFC Bloco 804, s/n – Pici, cep:60455-760, Fortaleza - CE, Brasil. E-mail: mqueirozamorim@yahoo.com 2Doutoranda em Engenharia Agrícola, Departamento de Engenharia Agrícola, Universidade Federal do Ceará-UFC Bloco 804, s/n - Pici, cep:60455-760, Fortaleza - CE, Brasil. E-mail: carla_nicolau18@yahoo.com.br 3Mestre em Engenharia Agrícola, Departamento de Engenharia Agrícola, Universidade Federal do Ceará-UFC Bloco 804, s/n - Pici, cep:60455-760, Fortaleza - CE, Brasil. E-mail: clicemendonca@gmail.com 4Doutorando em Engenharia Agrícola, Departamento de Engenharia Agrícola, Universidade Federal do Ceará-UFC Bloco 804, s/n - Pici, cep:60455-760, Fortaleza - CE, Brasil. E-mail: paulo_ptg@hotmail.com 5Professor Doutor, Universidade Federal do Triângulo Mineiro (UFTM), Departamento de Engenharia Agrícola, Av Rio Paranaíba, n: 1295, Centro, cep: 38280000, Iturama- MG, Brasil, E-mail: ca.chioderoli@gmail.com RESUMO: O processo de semeadura é uma etapa que merece considerável atenção durante a implantação da cultura. Diversos fatores, como velocidade de deslocamento e pressão de inflação dos rodados da semeadora, podem interferir diretamente no desempenho energético e operacional do conjunto mecanizado, no desenvolvimento inicial e no estabelecimento da cultura no campo. Objetivou-se, com este trabalho, avaliar o desempenho operacional e energético do conjunto trator-semeadora em função da pressão de inflação dos rodados da semeadora e velocidade de deslocamento do trator. O trabalho foi realizado na Universidade Federal do Ceará, Fortaleza (CE), na área do Laboratório de Investigação de Acidentes com Máquinas Agrícolas (LIMA). O experimento foi em blocos casualizados, em esquema fatorial 2 x 3, com quatro repetições, sendo duas pressões dos rodados da semeadora (138 Kpa e 165 kpa) e três velocidades de deslocamento do trator (3,9 km h-1, 4,9 km h-1, 7,0 Km h-1). A pressão de inflação dos rodados da semeadora de 138 kPa propiciou menor consumo de combustível e menor patinamento da semeadora. A velocidade teórica de 7,0 Km h-1 permitiu maior velocidade de deslocamento e maior capacidade de campo efetiva e operacional. Palavras-chaves: adequação, eficiência energética, semeadura. OPERATIONAL PERFORMANCE OF AN ENTIRE TRACTOR-SEEDER CONTINUOUS FLOW G I N FUNCTION OF TIRE PRESSURE OF INFLATION AND DISPLACEMENT SPEED ABSTRACT: Sowing process is a considerable steps that need attention during the crop planting. Factors as tire pressure or sower displacement speed, can directly interfere in energetic and operational performance of the entire tractor-seeder , initial development and crop implementation . The aim o of this study was to evaluate the energetic and operational performance of the entire tractor-seeder in function of tire inflation pressure and tractor displacement speed. The study was conducted at Federal University of Ceará in Fortaleza (CE), in the area of the Accident Investigation Laboratory in Agricultural Machinery (LIMA). The experiment was design in randomized block in a factorial 2 x 3, with four replications and two tire inflation pressures of sower wheelsets (138 kPa and 165 kPa) and three tractor displacement speed (3.9 km h-1, 4, 9 km h-1, 7.0 Km h-1). The inflation pressure of 138 kPa had lower fuel consumption and reduced wheel slip. The theoretical speed of 7.0 km h-1 allowed greater displacement speed and higher to effective and operational field capacity. Keywords: adaptation, energy efficiency, sowing.
The intensive use of agricultural areas for farming, together with inadequate management, can cause soil degradation and promote a low-quality environment for crops; An intercrop system of maize and forage can therefore be an alternative to existing production systems. The aim of this study was to identify the effect of intercropping maize with forage on the physical attributes of the soil and on productivity in maize, as a function of the sowing season and different forages, in the northeastern region of Brazil. A trial intercrop of maize with three forages (Brachiaria brizantha, Panicum maximum ‘Mombasa’, and Crotalaria spectabilis a.) was planted at two different times: phase 1-forage sown between the rows of maize, mixed with the basal dressing; and phase 2-forage sown between the rows, at the V4 stage in maize; in addition to maize with no intercrop (control). The trial was carried out in a randomised block design, with four replications. Forage Mombasa inserted in phase 1 (1) and phase (2) of sowing favored higher values of macroporosity in the layers 0.0-0.10 m and 0.10-0.20 m respectively. For the mass of 1000 grains and grain yield, there were no significant differences between the treatments when compared to the exclusive corn. It was concluded that the maize-forage intercrop promotes changes in the physical attributes of the soil (macroporosity, total porosity and density), and that maize productivity is not affected by the intercrop system.
Considerando que diversos fatores podem influenciar no processo de semeadura. O objetivo foi avaliar o desempenho energético e operacional do conjunto trator-semeadora-adubadora na semeadura do milho em função de dois mecanismos sulcadores e quatro coberturas do solo. O estudo foi conduzido no Departamento de Engenharia Agrícola da Universidade Federal do Ceará - Campus do Pici. O delineamento experimental foi em blocos ao acaso, os tratamentos consistiram em dois mecanismos sulcadores (disco e haste) e quatro coberturas do solo (crotalária, sorgo, capim mombaça e solo sem cobertura) com quatro repetições. As seguintes variáveis foram analisadas: força e potência na barra de tração, área mobilizada, profundidade de atuação dos mecanismos sulcadores, resistência específica operacional, velocidade de deslocamento, capacidade de campo operacional, patinamento dos rodados dianteiro e traseiro do trator, deslizamento do rodado da semeadora-adubadora, consumo horário de combustível, consumo operacional, consumo específico e consumo por área mobilizada. A área mobilizada foi igual para os dois tipos de mecanismos sulcadores. O mecanismo sulcador tipo haste demandou maior força e potência do conjunto trator-semeadora-adubadora e apresentou maior profundidade de atuação, o que proporcionou menor velocidade de deslocamento. Com relação aos mecanismos sulcadores para consumo horário e consumo operacional, não houve diferença estatística. As plantas de cobertura não influenciam no desempenho energético e operacional do conjunto trator-semeadora-adubadora, exceto para o deslizamento do rodado da semeadora-adubadora. O mecanismo sulcador tipo disco proporcionou melhor desempenho operacional e energético para o conjunto trator-semeadora-adubadora, exceto no consumo específico e consumo específico por área mobilizada.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.