Recently, interest in aluminium ion batteries with aluminium anodes, graphite cathodes and ionic liquid electrolytes has increased; however, much remains to be done to increase the cathode capacity and to understand details of the anion–graphite intercalation mechanism. Here, an aluminium ion battery cell made using pristine natural graphite flakes achieves a specific capacity of ∼110 mAh g−1 with Coulombic efficiency ∼98%, at a current density of 99 mA g−1 (0.9 C) with clear discharge voltage plateaus (2.25–2.0 V and 1.9–1.5 V). The cell has a capacity of 60 mAh g−1 at 6 C, over 6,000 cycles with Coulombic efficiency ∼ 99%. Raman spectroscopy shows two different intercalation processes involving chloroaluminate anions at the two discharging plateaus, while C–Cl bonding on the surface, or edges of natural graphite, is found using X-ray absorption spectroscopy. Finally, theoretical calculations are employed to investigate the intercalation behaviour of choloraluminate anions in the graphite electrode.

Photocatalytic water splitting is a key technology for long-term hydrogen evolution with low environmental impact.

Perovskite α-CsPbI3 nanocrystals (NCs) with a high fluorescence quantum yield (QY) typically undergo a rapid phase transformation to a low-QY δ-CsPbI3 phase, thus limiting their optoelectronic applications. In this study, organic molecule hexa­methyl­di­sila­thiane (HMS) is used as a unique surfactant to greatly enhance the stability of the cubic phase of CsPbI3 NCs (HMS-CsPbI3) under ambient conditions. The reaction kinetics of the phase transformation of CsPbI3 NCs are systemically investigated through in situ photoluminescence (PL), X-ray diffraction, and transmission electron microscope (TEM) measurements under moisture. The activation energy of HMS-CsPbI3 NCs is found to be 14 times larger than that of CsPbI3 NCs capped by olyelamine (OLA-CsPbI3 NCs). According to density functional theory calculations, the bonding between HMS and CsPbI3 NCs is stronger than that between OLA and CsPbI3 NCs, preventing the subsequent phase transformation. Our study presents a clear pathway for achieving highly stable CsPbI3 NCs for future applications.

This work presents a novel photo‐electrochemical architecture based on the 3D pyramid‐like graphene/p‐Si Schottky junctions. Overcoming the conventional transfer technique by which only planar graphene/Si Schottky junctions are currently available, this work demonstrates the 3D pyramid‐like graphene/p‐Si Schottky junction photocathode, which greatly enhances light harvesting efficiency and exhibits promising photo‐electrochemical performance for hydrogen generation. The formation of 3D pyramid‐like graphene/p‐Si Schottky junctions exhibits enhanced electrochemical activity and promotes charge separation efficiency compared with the bare pyramid Si surface without graphene. The inherent chemical inertness of graphene significantly improves the operational stability of 3D graphene/p‐Si Schottky junction photo‐electrochemical cells. The 3D pyramid‐like graphene/p‐Si Schottky junction photocathode delivers an onset potential of 0.41 V and a saturated photocurrent density of −32.5 mA cm−2 at 0 V (vs RHE) with excellent stability comparable to values reported for textured or nanostructured p‐Si photocathodes coated with ultrathin oxide layers by the conventional atomic layer deposition technique. These results suggest that the formation of graphene/Si Schottky junctions with a 3D architecture is a promising approach to improve the performance and durability of Si‐based photo‐electrochemical systems for water splitting or solar‐to‐fuel conversion.