Las estructuras de disyunción columnar en rocas volcánicas corresponden al patrón de diaclasas que resulta de la contracción y deformación de los materiales durante el enfriamiento post emplazamiento. Estas pueden desarrollarse tanto en lavas como en depósitos de corrientes de densidad piroclástica (CDP) soldadas. En este estudio se analizaron visualmente 394 polígonos en 14 afloramientos de rocas volcánicas y depósitos volcaniclásticos soldados con disyunción columnar en Colombia, y computacionalmente, 349 polígonos definidos por procesamiento de imágenes. Estas medidas, junto con las variaciones relativas de tamaños de las columnas, fueron utilizadas para estimar la homogeneidad, el orden y la madurez de los patrones de disyunción. La relación entre tamaños de estrías y longitud de lado de columnas se usó para aproximar el mecanismo de disipación calórica dominante durante el emplazamiento de lavas y CDP. La inspección visual de afloramientos reveló que en lavas domina la geometría hexagonal, mientras que en depósitos de CDP dominan los pentágonos y tetrágonos. El análisis computacional indica que, en general, la disyunción columnar en Colombia tiende a organizarse en geometría hexagonal óptima. Específicamente, el afloramiento denominado Cristales, ubicado en el flanco suroriental del Nevado del Ruiz, en la cordillera Central, presenta el mayor grado de madurez; el Domo Victoria, un volcán monogenético de la cordillera Central, tiene el mayor grado de homogeneidad; y el sitio Los Ataúdes, ubicado en el flanco occidental de la cordillera Occidental, muestra el mayor grado de ordenamiento. Las estrías usualmente están entre 10 y 25% del lado de columnas. Los valores del número de Péclet entre 0,28 y 0,41 indican que en el emplazamiento de las lavas dominó la transferencia de calor conductiva, aunque no se puede descartar la disipación de calor convectiva asistida por diaclasas.
En el presente trabajo se exponen la metodología y los resultados obtenidos de los ejercicios de intercomparación que fueron adelantados por el Laboratorio Secundario de Calibración Dosimétrica (LSCD) del Servicio Geológico Colombiano en los años 2016 y 2017, con el Laboratorio Secundario del Centro de Protección e Higiene de las Radiaciones (CPHR), de Cuba, y el Laboratorio de Dosimetría del Organismo Internacional de Energía Atómica (OIEA), mediante la calibración de cámaras de transferencia en la magnitud tasa de kerma en aire con haz de 137Cs por el método que usualmente sigue cada laboratorio. De dichos ejercicios se obtuvieron resultados satisfactorios con respecto a la metodología de calibración normalizada que es implementada en el LSCD, la cual a su vez brinda confiabilidad en sus resultados y en la trazabilidad de las magnitudes operacionales en las medidas de campo de los instrumentos utilizados en protección radiológica en Colombia.
En este trabajo se presentan los resultados obtenidos al desarrollar la metodología propuesta en la norma IEC 61267 para la caracterización de las calidades de radiación del haz de rayos x para radiodiagnóstico. Las características fueron analizadas por medio de la medición de los parámetros: filtración inherente, primera capa hemireductora (1oHVL) y coeficiente de homogeneidad, estas mediciones se realizaron solo para la calidad de radiación RQR3. Los materiales utilizados en el trabajo fueron: el tubo de rayos x Balteau NDT modelo XSDBip-LS1 instalado en Laboratorio Secundario de Calibración Dosimétrica (LSCD), cámara de ionización de placas paralelas con un volumen de 75cm3 modelo 39060, filtros de aluminio de diferentes espesores con una pureza del 99.9% y una cámara monitora PTW tipo 34014. Los resultados obtenidos de filtración inherente nos permitieron comprobar que el tubo puede ser utilizado para la implementación de las demás calidades de radiodiagnóstico, además se determinó que la medición de los restantes parámetros encontrados para RQR3 están dentro de los límites propuestos en la norma. Estos resultados son un aporte fundamental al posterior establecimiento de patrones de referencia a nivel de radiodiagnóstico, mamografía y tomografía computarizada que en la actualidad no existen en el país.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.