The ‘Progress in the ITER Physics Basis’ (PIPB) document is an update of the ‘ITER Physics Basis’ (IPB), which was published in 1999 [1]. The IPB provided methodologies for projecting the performance of burning plasmas, developed largely through coordinated experimental, modelling and theoretical activities carried out on today's large tokamaks (ITER Physics R&D). In the IPB, projections for ITER (1998 Design) were also presented. The IPB also pointed out some outstanding issues. These issues have been addressed by the Participant Teams of ITER (the European Union, Japan, Russia and the USA), for which International Tokamak Physics Activities (ITPA) provided a forum of scientists, focusing on open issues pointed out in the IPB. The new methodologies of projection and control are applied to ITER, which was redesigned under revised technical objectives. These analyses suggest that the achievement of Q > 10 in the inductive operation is feasible. Further, improved confinement and beta observed with low shear (= high βp = ‘hybrid’) operation scenarios, if achieved in ITER, could provide attractive scenarios with high Q (> 10), long pulse (>1000 s) operation with beta

Significant progress has been made in the area of advanced modes of operation that are candidates for achieving steady state conditions in a fusion reactor. The corresponding parameters, domain of operation, scenarios and integration issues of advanced scenarios are discussed in this chapter. A review of the presently developed scenarios, including discussions on operational space, is given. Significant progress has been made in the domain of heating and current drive in recent years, especially in the domain of off-axis current drive, which is essential for the achievement of the required current profile. The actuators for heating and current drive that are necessary to produce and control the advanced tokamak discharges are discussed, including modelling and predictions for ITER. The specific control issues for steady state operation are discussed, including the already existing experimental results as well as the various strategies and needs (qψ profile control and temperature gradients). Achievable parameters for the ITER steady state and hybrid scenarios with foreseen heating and current drive systems are discussed using modelling including actuators, allowing an assessment of achievable current profiles. Finally, a summary is given in the last section including outstanding issues and recommendations for further research and development.

Tokamak discharges with improved energy confinement properties arising from internal transport barriers (ITBs) have certain attractive features, such as a large bootstrap current fraction, which suggest a potential route to the steady-state mode of operation desirable for fusion power plants. This paper first reviews the present state of theoretical and experimental knowledge regarding the formation and characteristics of ITBs in tokamaks. Specifically, the current status of theoretical modelling of ITBs is presented; then, an international ITB database based on experimental information extracted from some nine tokamaks is described and used to draw some general conclusions concerning the necessary conditions for ITBs to appear, comparing these with the theoretical models. The experimental situation regarding the steady-state, or at least quasi-steady-state, operation of tokamaks is reviewed and finally the issues and prospects for achieving such operational modes in ITER are discussed. More detailed information on the characteristics of ITBs in some 13 tokamaks (as well as helical devices) appears in the appendix.

No abstract

In 2003, the performance of the ‘hybrid’ regime was successfully validated in JET experiments up to βN = 2.8 at low toroidal field (1.7 T), with plasma triangularity and normalized Larmor radius (ρ*) corresponding to identical ASDEX Upgrade discharges. Stationary conditions have been achieved with the fusion figure of merit ( ) reaching 0.42 at q95 = 3.9. The JET discharges show similar MHD, edge and current profile behaviour, when compared with the ASDEX Upgrade. In addition, the JET experiments have extended the hybrid scenario operation at higher toroidal field of 2.4 T and lower ρ* towards the projected ITER values. Using this database, transport and confinement properties are characterized with respect to the standard H-mode regime. Moreover, trace tritium has been injected to assess the diffusion and convective coefficients of the fusion fuel. The maximization of confinement and stability properties provides, to this scenario, a good probability of achieving a high fusion gain at reduced plasma current for durations of up to 2000 s in ITER.