This paper focuses on a stability analysis related to a highway constructed on a slope with high shear potential reinforced with the piles. For this purpose, a series of two-dimensional simulations were carried out by employing the finite element method. In the study, in order to provide the current state of topography, a numerical model was created based on data obtained from field and laboratory tests. It is aimed to define the safety factor of a slope under both static and dynamic loads, and that value was calculated for the following three cases: (i) for the slope unreinforced with the piles subjected to static loading, (ii) for the slope reinforced with the piles subjected to static loading, (iii) for the slope reinforced with the piles subjected to both static and dynamic loading. The numerical results indicate that it is a good approach to be used the piles to enhance the stability of the slope even though dynamic loading brings about to decline in the slope safety factor. Plus, the relevant value was determined to be 1.446 in the second case explained above while the same value was calculated to be 1.104 in the third case. Therefore, it is understood that the dynamic loads caused by the vehicles should be considered in the design of these kinds of problems, and the improvement method should be evaluated in detail.
Bu çalışmada bir şev stabilitesi problemi incelenmektedir. Şev üzerinde bir yol güzergâhı bulunmaktadır ve şevin göçme potansiyeli yüksektir. Bu çalışmanın amacı, şevde güvenlik analizinde kullanılan programların tutarlılığının incelenmesi ve şev hareketini önleyecek tasarımın belirlenmesidir. Bu amaçla, ilk olarak, şevin topoğrafik özellikleri belirlenmiş ve mevcut duruma ait model oluşturulmuştur. Şev modeline ait verileri elde etmek için arazi ve laboratuvar çalışmalarından faydalanılmıştır. Geri analiz yöntemi kullanılarak kayma yüzeyine ait parametreler elde edilmiştir. Mevcut durumu yansıtan model üzerinde, şevi güvenli hale getirecek tasarım oluşturulmuştur. Analizler; sonlu elemanlar yöntemini esas alan Plaxis 2D (2018) ve limit denge yöntemlerine dayanan Slide V.6.0. programları ile gerçekleştirilmiştir. Sonuç olarak, güvenlik analizi hesabında kullanılan programlardan uyumlu sonuçlar elde edilmiştir. Ele alınan şev stabilitesi probleminde, iyileştirme yöntemi olarak fore kazıkla destekleme uygun görülmüştür. Ek olarak drenaj yöntemleri ile yüzey sularının uzaklaştırılması önerilmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.