Rapid prototyping for material deposition or additive manufacturing has been widely used for short time production of parts with complex geometry in small series. The three-dimensional printing process needs post-processing to improve the strength, stiffness and/or surface finish of the parts. Printed parts in pristine condition are generally very brittle with a porous structure, so infiltrates have been introduced to improve their mechanical and physical characteristics. This work investigates the effect of two infiltrates, epoxy polymer and cyanoacrylate, under a vacuum pressure system on the mechanical properties of powder-based composites made by three-dimensional printing. Samples printed under pristine and infiltrated conditions were tested under tensile, flexural, compressive and impact loadings. The infiltrated samples achieved superior mechanical properties, especially when the epoxy polymer was applied via a vacuum system. The microstructural analysis showed that the infiltrates were not able to penetrate the entire sample, revealing a porous structure in the centre, mainly when the cyanoacrylate was used. The epoxy polymer infiltrate was able to substantially increase the mechanical performance of three-dimensional samples, being a promising material when higher structural requirements are required.
Over the years, with the increasing development of engineering materials, the emergence of new composites, fiber metal laminated, biomaterials, metal alloys etc., and with demand for products less expensive, less polluting and more efficient, the manufacturing engineering also needs to develop to be able to process these new materials. Materials and tool geometries, intelligent mechanisms, modular machines, also follow this setting. To that end, this work comes to raise the main parameters that influence in the hole quality surface of finished product. Were used two polymeric materials, ultra high molecular weight polyethylene (UHMW-PE) and polytetrafluoroethylene (PTFE), two feed rates, three rotations and three tool geometries, allowing to identify which of these parameters have greater influence on the thrust force and the characteristics of the finished product and dimensional deviation.
Direitos para esta edição cedidos à Atena Editora pelos autores. Todo o conteúdo deste livro está licenciado sob uma Licença de Atribuição Creative Commons. Atribuição 4.0 Internacional (CC BY 4.0). O conteúdo dos artigos e seus dados em sua forma, correção e confiabilidade são de responsabilidade exclusiva dos autores, inclusive não representam necessariamente a posição oficial da Atena Editora. Permitido o download da obra e o compartilhamento desde que sejam atribuídos créditos aos autores, mas sem a possibilidade de alterá-la de nenhuma forma ou utilizá-la para fins comerciais. A Atena Editora não se responsabiliza por eventuais mudanças ocorridas nos endereços convencionais ou eletrônicos citados nesta obra. Todos os manuscritos foram previamente submetidos à avaliação cega pelos pares, membros do Conselho Editorial desta Editora, tendo sido aprovados para a publicação.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.