Various wearable aerogel sensors are emerging for their light weight, fairly wide sensing range, and sensitive sensing ability. Aramid nanofibers (ANFs) as a kind of burgeoning building blocks realize multifunctional applications in diversified fields for their innate extinguished mechanical property and thermal stability. Limited by their high insulating property, in this work ANFs were designed to integrate with a 2D emerging MXene sheet with a distinct conductive property. Herein, we report an MXene/ANFs composite aerogel through a feasible controllable vacuum filtration followed by a freeze-drying process. Benefiting from the inerratic 3D hierarchical and "mortar− brick" porous structure with an ultralow density of 25 mg/cm 3 , MXene/ANFs aerogels are proved to possess high compressible resilience and appealing sensing performance up to 1000 times. Importantly, verified by a series of simulation experiments, the MXene/ANFs aerogel sensor shows a wide detection range (2.0−80.0% compression strain), sensitive sensing property (128 kPa −1 ), and ultralow detection limit (100 Pa), which still play a flexible role in detecting human light movement and even vigorous sports after undergoing ultrahigh devastating pressures (∼623 kPa). In addition, the MXene/ANFs aerogel sensor can withstand a harsh high temperature of 200 °C and shows excellent flame resistance. The MXene/ANFs aerogel with excellent integrated property, especially the highly sensitive sensing property and excellent thermal stability, presents great potential for a human behavior monitoring sensor and sensing under certain extreme conditions.

High-performance and rapid response electrical heaters with ultraflexibility, superior heat resistance, and mechanical properties are highly desirable for the development of wearable devices, artificial intelligence, and high-performance heating systems in areas such as aerospace and the military. Herein, a facile and efficient two-step vacuum-assisted filtration followed by hot-pressing approach is presented to fabricate versatile electrical heaters based on the high-performance aramid nanofibers (ANFs) and highly conductive Ag nanowires (AgNWs). The resultant ANF/AgNW nanocomposite papers present ultraflexibility, extremely low sheet resistance (minimum R s of 0.12 Ω/sq), and outstanding heat resistance (thermal degradation temperature above 500 °C) and mechanical properties (tensile strength of 285.7 MPa, tensile modulus of 6.51 GPa with a AgNW area fraction of 0.4 g/m2), benefiting from the partial embedding of AgNWs into the ANF substrate and the extensive hydrogen-bonding interactions. Moreover, the ANF/AgNW nanocomposite paper-based electrical heaters exhibit satisfyingly high heating temperatures (up to ∼200 °C) with rapid response time (10–30 s) at low AgNW area fractions and supplied voltages (0.5–5 V) and possess sufficient heating reliability, stability, and repeatability during the long-term and repeated heating and cooling cycles. Fully functional applications of the ANF/AgNW nanocomposite paper-based electrical heaters are demonstrated, indicating their excellent potential for emerging electronic applications such as wearable devices, artificial intelligence, and high-performance heating systems.

Aramid nanofibers (ANFs) are of great interest in various applications due to its 1D nanoscale, high aspect ratio, high specific surface area, excellent strength, and modulus as well as impressive chemical and thermal stabilities. It is considered as one of the most promising nano-sized building blocks with excellent properties and has therefore drawn increasing attention since 2011. However, no review has summarized the research progress and the prospective challenges of ANF. Herein, the methods of ANF fabrication and their relative merits are comprehensively discussed together with the challenges and progress in the deprotonation method for preparing ANF. The fabrication methods and development of ANF-based advanced materials with different macroscopic morphologies, including the 1D ANF aerogel fiber, 2D ANF film/nanopaper/coating, and 3D ANF gel and particle are also described. Furthermore, the applications of ANF in nanocomposite reinforcement, battery separators, electrical insulation nanopaper, flexible electronics, and adsorption and filtration media are presented. Additionally, the possible challenges and outlooks toward the future development of ANF are highlighted. This review indicates that the ANF and ANF-based materials mentioned herein will boost the development of next-generation advanced functional materials.

Aramid nanofibers (ANFs) have become promising nanoscale building blocks due to their extraordinary performance. However, there are numerous challenges related to the preparation of ANFs, such as the lengthy preparation cycle (7−10 days), low preparation concentration (0.2 wt %), and high difficulty in quantitatively judging the end point of the deprotonation reaction. Herein, we report three time-saving and high-efficiency strategies (fibrillation, ultrasonication, and proton donorassisted deprotonation) to prepare ANFs with excellent performance. The fiber micromorphology during the deprotonation and protonation recovery processes was first investigated. Then the end point of the deprotonation reaction was detected by Raman spectra and the cationic demand of the ANF/DMSO system. Finally, the size, preparation cycle, and performance of the corresponding ANFs and ANF films fabricated by different approaches were investigated in detail. The results showed that proton donor-assisted deprotonation significantly shortened the traditional preparation cycle from 7 days to 4 h, and is the most efficient method reported thus far. It is noteworthy that a high concentration of ANFs (4.0 wt %) could also be achieved within 12 h. Interestingly, the fabricated ANFs exhibit rigid morphology and a small diameter with a narrow size distribution (10.7 ± 1.0 nm). The resultant ANF film displays desired characteristics of high strength and toughness. The work offers a timesaving, feasible and effective strategy to realize the large-scale production for ANFs, which will facilitate the application of ANFs in the production of advanced nanomaterials.

No abstract