We explore how to configure an argon atmospheric-pressure plasma jet for enhancing its production of hydrogen peroxide (H2O2) in deionised water (DIW). The plasma jet consists of a quartz tube of 1.5 mm inner diameter and 3 mm outer diameter, with an upstream internal needle electrode (within the tube) and a downstream external cylindrical electrode (surrounding the tube). The plasma is operated by purging argon through the glass tube and applying a sinusoidal AC voltage to the internal needle electrode at 10 kV (peak–peak) with a frequency of 23.5 kHz. We study how the following operational parameters influence the production rate of H2O2 in water: tube length, inter-electrode separation distance, distance of the ground electrode from the tube orifice, distance between tube orifice and the DIW, argon flow rate and treatment time. By examining the electrical and optical properties of the plasma jet, we determine how the above operational parameters influence the major plasma processes that promote H2O2 generation through electron-induced dissociation reactions and UV photolysis within the plasma core and in the plasma afterglow; but with a caveat being that these processes are highly dependent on the water vapour content from the argon gas supply and ambient environment. We then demonstrate how the synergistic action between H2O2 and other plasma generated molecules at a plasma induced low pH in the DIW is highly effective at decontaminating common wound pathogens Gram-positive Staphylococus aureus and Gram-negative Pseudomonas aeruginosa. The information presented in this study is relevant in the design of medical plasma devices where production of plasma reactive species such as H2O2 at physiologically useful concentrations is needed to help realise the full clinical potential of the technology.

Infection and blockage of indwelling urinary catheters is significant owing to its high incidence rate and severe medical consequences. Bacterial enzymes are employed as targets for small molecular intervention in human bacterial infections. Urease is a metalloenzyme known to play a crucial role in the pathogenesis and virulence of catheter-associated Proteus mirabilis infection. Targeting urease as a therapeutic candidate facilitates the disarming of bacterial virulence without affecting bacterial fitness, thereby limiting the selective pressure placed on the invading population and lowering the rate at which it will acquire resistance. We describe the design, synthesis, and in vitro evaluation of the small molecular enzyme inhibitor 2-mercaptoacetamide (2-MA), which can prevent encrustation and blockage of urinary catheters in a physiologically representative in vitro model of the catheterized urinary tract. 2-MA is a structural analogue of urea, showing promising competitive activity against urease. In silico docking experiments demonstrated 2-MA’s competitive inhibition, whilst further quantum level modelling suggests two possible binding mechanisms.

Validating clinical practice guidelines for the management of children with nonblanching rashes in the United Kingdom.

The extensive use of antibiotics over the last decades is responsible for the emergence of multidrug-resistant (MDR) microorganisms that are challenging health care systems worldwide. The use of alternative antimicrobial materials could mitigate the selection of new MDR strains by reducing antibiotic overuse. This paper describes the design of enzyme-based antimicrobial cellulose beads containing a covalently coupled glucose oxidase from Aspergillus niger (GOx) able to release antimicrobial concentrations of hydrogen peroxide (H 2 O 2 ) (≈ 1.8 mM). The material preparation was optimized to obtain the best performance in terms of mechanical resistance, shelf life, and H 2 O 2 production. As a proof of concept, agar inhibition halo assays (Kirby-Bauer test) against model pathogens were performed. The two most relevant factors affecting the bead functionalization process were the degree of oxidation and the pH used for the enzyme binding process. Slightly acidic conditions during the functionalization process (pH 6) showed the best results for the GOx/cellulose system. The functionalized beads inhibited the growth of all the microorganisms assayed, confirming the release of sufficient antimicrobial levels of H 2 O 2 . The maximum inhibition efficiency was exhibited toward Pseudomonas aeruginosa ( P. aeruginosa ) and Escherichia coli ( E. coli ), although significant inhibitory effects toward methicillin-resistant Staphylococcus aureus (MRSA) and S. aureus were also observed. These enzyme-functionalized cellulose beads represent an inexpensive, sustainable, and biocompatible antimicrobial material with potential use in many applications, including the manufacturing of biomedical products and additives for food preservation.

Alkaline phosphatase (ALP) is an important enzyme-based biomarker present in several bacterial species; however, it is currently undervalued as a strategy to detect pathogenic bacteria. Here, we explore our ALP-responsive...