In this paper a comparison of a sixth-order active band pass R-filter output response with the output response of a sixth-order band pass RC-filter at different quality factors (Q = 2, 5, 7, 8 and 10) was carried out at a fixed frequency of 10 KHz. The architecture used in the design is the multiple feedbacks for both filter networks. The simulated response characteristics show that both filters (R-and RC-filters) have their mid-band gains increasing with Q, while their bandwidths monotonically decreased with Q-values. The bandwidths are in the range of 22.23 dB to 62.97 dB and −55.49 dB to −50.81 dB (Q = 2 to 10) for R-and RC-filters respectively. At higher Q-values, R-filter showed better selectivity with a smaller bandwidth (400 Hz) at the edge of the pass band, when compared to 450 Hz for the RC-filter. The roll-off rate around −58.9 dB/decade for the R-filter appears to be that of a third-order filter response, while the RC-filter has its response in the range −106 to −132 dB/decade which is in the neighbourhood of an ideal sixth-order response (roll-off of 120 db/decade). A shift in the center frequency with Q was observed for the RC-filter only.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.