Optical parametric chirped-pulse amplification (OPCPA) [Dubietis et al., Opt. Commun. 88, 437 (1992)] implemented by multikilojoule Nd:glass pump lasers is a promising approach to produce ultraintense pulses (>10 23 W/cm 2 ). Technologies are being developed to upgrade the OMEGA EP Laser System with the goal to pump an optical parametric amplifier line (EP OPAL) with two of the OMEGA EP beamlines. The resulting ultraintense pulses (1.5 kJ, 20 fs, 10 24 W/cm 2 ) would be used jointly with picosecond and nanosecond pulses produced by the other two beamlines. A midscale OPAL pumped by the Multi-Terawatt (MTW) laser is being constructed to produce 7.5-J, 15-fs pulses and demonstrate scalable technologies suitable for the upgrade. MTW OPAL will share a target area with the MTW laser (50 J, 1 to 100 ps), enabling several joint-shot configurations. We report on the status of the MTW OPAL system, and the technology development required for this class of all-OPCPA laser system for ultraintense pulses.

Abstract. More than 20 years after the first presentation of optical parametric chirped-pulse amplification (OPCPA), the technology has matured as a powerful technique to produce high-intensity, few-cycle, and ultrashort laser pulses. The output characteristics of these systems cover a wide range of center wavelengths, pulse energies, and average powers. The current record performance of table-top, few-cycle OPCPA systems are 16 TW peak power and 22 W average power, which show that OPCPA is able to directly compete with Ti:sapphire chirped-pulse amplification-based systems as source for intense optical pulses. Here, we review the concepts of OPCPA and present the current state-of-the art performance level for several systems reported in the literature. To date, the performance of these systems is most generally limited by the employed pump laser. Thus, we present a comprehensive review on the recent progress in high-energy, high-average-power, picosecond laser systems, which provide improved performance relative to OPCPA pump lasers employed to date. From here, the impact of these novel pump lasers on table-top, few-cycle OPCPA is detailed and the prospects for next-generation OPCPA systems are discussed.

Optical parametric chirped-pulse amplification implemented using multikilojoule Nd:glass pump lasers is a promising approach for producing ultra-intense pulses (>10 23 W/cm 2 ). We report on the MTW-OPAL Laser System, an optical parametric amplifier line (OPAL) pumped by the Nd:doped portion of the Multi-Terawatt (MTW) laser. This midscale prototype was designed to produce 0.5-PW pulses with technologies scalable to tens of PW's. Technology choices made for MTW-OPAL were guided by the longer-term goal of two full-scale OPAL's pumped by the OMEGA EP laser to produce 2  25-PW beams that would be co-located with kilojoulenanosecond UV beams. Several MTW-OPAL campaigns that have been completed since "first light" in March 2020 show that laser design is fundamentally sound, and optimization continues as we prepare for "first focus" campaigns later this year.