No abstract

Highlights• Significant differences (p < 0.01) among five stands were found in tree height, stress-wave velocity of stems, dynamic Young's modulus of stems and logs, annual ring width, and latewood percentage, suggesting that there was geographic variation of mechanical properties of wood in Larix sibirica (Münchh.) Ledeb. grown in Mongolia. • Dynamic Young's modulus of logs in L. sibirica trees can be predicted by stress-wave velocity of stems. • Stem diameter of L. sibirica naturally grown in Mongolia is closely related to radial growth at initial stage of growth, especially within the first twenty years. AbstractGeographic variations in growth, stress-wave velocity of stem, dynamic Young's modulus of stems and logs, annual ring width, latewood percentage and basic density were investigated for Larix sibirica (Münchh.) Ledeb. naturally grown in Mongolia. A total of 250 trees with 20 to 30 cm in stem diameter at a height of 1.3 m above ground level were selected from each natural stand in five different provenances in Mongolia. In addition, five trees in each stand were cut for measuring dynamic Young's modulus of stems and logs, annual ring width, latewood percentage and basic density. Mean values of stress-wave velocity of stems in each stand ranged from 2.92 to 3.41 km s -1 , and the mean value of five stands was 3.23 km s -1 . Mean values of dynamic Young's modulus of logs in each stand ranged from 5.17 to 9.72 GPa. A significant correlation (r = 0.798, p < 0.01) was found between stress-wave velocity of stems and dynamic Young's modulus of logs. Among the five stands, the highest and the lowest values of average annual ring number were 193 and 44, respectively. Mean values of basic density in five trees within each stand were examined and ranged from 0.52 to 0.56 g cm -3 . Significant differences among five stands were found in tree height, stress-wave velocity of stem, dynamic Young's modulus of stems and logs, annual ring width and latewood percentage, suggesting that L. sibirica trees naturally grown in Mongolia have geographic variations in mechanical properties of wood.

The wood properties were examined for Larix sibirica naturally grown in Tosontsengel, Mongolia. The dynamic Young's modulus of the logs ranged from 6.31 to 9.65 GPa. The mean values of wood properties were as follows: water-extracted basic density = 0.44 g cm −3 , air-dry density = 0.59 g cm −3 , shrinkage at 1% moisture content change in the radial and tangential directions = 0.18% and 0.32%, modulus of elasticity = 11.24 GPa, modulus of rupture = 102.4 MPa, compressive strength parallel to the grain = 53.1 MPa, and mass loss by Fomitopsis palustris and Trametes versicolor = 10.4% and 18.6%. Mass loss in the heartwood was higher than that in the sapwood, indicating that the larger mass loss values in the heartwood of L. sibirica might be related to the larger amount of arabinogalactan.

The modulus of elasticity (MOE) and modulus of rupture (MOR) were evaluated for 190 pieces of dimension lumber (2 by 4 lumber, 38 by 89 mm in cross-section) produced from Larix sibirica trees grown in Mongolia. The 5% tolerance limits of the MOE and MOR were 5.70 GPa and 15.1 MPa, respectively. The value of the 5% tolerance limit of the MOR exceeded the characteristic value of 2 by 4 lumber in visual grading class No. 3 of the Japanese Agricultural Standard for the D. fir-L, Hem-Tam, JS-III and S-P-F softwood species groups. A significant positive correlation was found between the MOE and MOR, although air-dry density was weakly correlated with bending properties in L. sibirica.

Pinus sylvestris L., Pinus sibirica Du Tour, Picea obovata Ledeb., and Larix sibirica Ledeb. are important forest tree species in Mongolia. The radial variations of wood anatomical characteristics, physical and mechanical properties were evaluated by linear or nonlinear mixed-effects models for effective wood utilization of those of conifers. Many of these wood properties either increased or decreased from the pith to the bark and then became nearly constant based on the selected models. The properties of mature wood were estimated by nonlinear mixed-effects models, suggesting that P. sylvestris and L. sibirica are suitable as structural lumber, P. sibirica can be used for furniture and other interior products, and P. obovata is suitable for structural lumber as well as for furniture or interior products.