This article proposes a multiple input multiple output (MIMO) antenna for 5G‐based vehicular communication applications. The designed MIMO antenna consist of two element iterated T‐shape antenna with defected ground structure (DGS) and split ring resonator. The antenna providing reflection coefficient S11
s11 ≤10 dB and bandwidth of 6.3 and 3.96 GHz over the frequency range of 26.83 to 33.13 GHz and 34.17 to 38.13 GHz, respectively. For the suitable future vehicular millimetric wave communications, this antenna achieved resonant frequencies at 28, 33, and 37 GHz. The designed antenna has achieved peak gain of 7.11 dB in operating band. It is fabricated on 12 x 25.4 x 0.8 mm3 Rogers RT duroid 5880 substrate with dielectric constant (εr) of 2.2. The antenna is placed on vehicle in virtual environmental using ANSYS SAVANT tool and the simulated results are showing good matching with the measured results of proposed MIMO antenna.
This article explores the design and analysis of a novel ultra‐wideband (UWB) antenna for body‐centric applications. The designed antenna consists of circular ring structured radiating element with 24 spokes, which resembles the shape of Ashoka chakra (Indian National flag emblem). The antenna placed on the semi flexible RT/Duroid 5880 with dielectric constant of 2.2 and occupying the dimension of 30 × 25 × 0.8 mm3. The present design aims at optimizing the antenna structure to cater UWB operating spectrum (3.1‐10.6 GHz) with a novel patch shape, which looks like the Ashoka chakra. The proposed antenna is analyzed by placing on three‐layered human phantom model and examined on head, arm at three of its operating frequencies. The maximum specific absorption rate (SAR) is found to be 1.23 W/kg and 1.29 W/kg when computed at arm and head of the human body respectively. The SAR values are observed under those conditions are satisfying the international safety standards such as FCC & IEEE C95.1:2005 & ICNIPR. Analysis of system savant (ANSYS Savant) radiation performance characteristics are also studied by placing the proposed antenna on virtual human body environment.
This article presents the design and analysis of a dual-band antenna with circular polarization for ISM and WLAN band applications. The proposed antenna operates at two frequencies ranging from 2.1-3.1 GHz and 4.4-7.7 GHz with resonating frequencies at 2.45 GHz industrial, scientific and medical band (ISM) and 5.8 GHz wireless local area network band (WLAN). The antenna is fed by coplanar waveguide feeding (CPW) with an asymmetric ground structure, and the radiating element consists of 24 spokes in the design. The current antenna providing the impedance bandwidths of 38.4% and 49% at two operating bands. The proposed antenna exhibiting circular polarisation with 3 dB axial ratio bandwidth of 150 MHz at 2.33-2.48 GHz and 1600 MHz at 5.14-6.74 GHz. The designed antenna is fabricated on an RT Duroid 5880 substrate with dimensions of 40 × 28 × 0.4 mm 3 . The intension behind the design of this antenna is to use it for wearable applications in conformal nature with low specific absorption rate (SAR). The SAR values observed at two operating frequencies are 1.09 W/Kg and 1.47 W/Kg on hand and 0.946 W/Kg and 1.12 W/Kg on head, respectively. The placement and radiation characteristics analysis is done with Ansys Savant tool, and the subsequent measured results provide good correlation with simulation results.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.