This article describes a point-of-care (POC) system--comprising a microfluidic, paper-based analytical device (micro-PAD) and a hand-held optical colorimeter--for quantifying the concentration of analytes in biological fluids. The micro-PAD runs colorimetric assays, and consists of paper that has been (i) patterned to expose isolated regions of hydrophilic zones and (ii) wet with an index-matching fluid (e.g., vegetable oil) that is applied using a disposable, plastic sleeve encasement. Measuring transmittance through paper represents a new method of quantitative detection that expands the potential functionality of micro-PADs. This prototype transmittance colorimeter is inexpensive, rugged, and fully self-contained, and thus potentially attractive for use in resource-limited environments and developing countries.

Broadband interferometry is an attractive technique for the detection of cellular motions because it provides depth-resolved phase information via coherence gating. We present a phase-sensitive technique called spectral-domain phase microscopy (SDPM). SDPM is a functional extension of spectral-domain optical coherence tomography that allows for the detection of nanometer-scale motions in living cells. The sensitivity of the technique is demonstrated, and its calibration is verified. A shot-noise limit to the displacement sensitivity of this technique is derived. Measurement of cellular dynamics was performed on spontaneously beating cardiomyocytes isolated from chick embryos.

Sound is encoded within the auditory portion of the inner ear, the cochlea, after propagating down its length as a traveling wave. For over half a century, vibratory measurements to study cochlear traveling waves have been made using invasive approaches such as laser Doppler vibrometry. Although these studies have provided critical information regarding the nonlinear processes within the living cochlea that increase the amplitude of vibration and sharpen frequency tuning, the data have typically been limited to point measurements of basilar membrane vibration. In addition, opening the cochlea may alter its function and affect the findings. Here we describe volumetric optical coherence tomography vibrometry, a technique that overcomes these limitations by providing depthresolved displacement measurements at 200 kHz inside a 3D volume of tissue with picometer sensitivity. We studied the mouse cochlea by imaging noninvasively through the surrounding bone to measure sound-induced vibrations of the sensory structures in vivo, and report, to our knowledge, the first measures of tectorial membrane vibration within the unopened cochlea. We found that the tectorial membrane sustains traveling wave propagation. Compared with basilar membrane traveling waves, tectorial membrane traveling waves have larger dynamic ranges, sharper frequency tuning, and apically shifted positions of peak vibration. These findings explain discrepancies between previously published basilar membrane vibration and auditory nerve single unit data. Because the tectorial membrane directly overlies the inner hair cell stereociliary bundles, these data provide the most accurate characterization of the stimulus shaping the afferent auditory response available to date.hearing | cochlea | mechanics | vibrometry | auditory system

Magnetic levitation (MagLev) enables 3D self‐assembly of diamagnetic objects with control over many aspects of position and orientation. This work demonstrates the ability of MagLev to position and align components, such as mirrors, filters, lenses, and soft objects, without mechanical support.

This paper describes several noncontact methods of orienting objects in 3D space using Magnetic Levitation (MagLev). The methods use two permanent magnets arranged coaxially with like poles facing and a container containing a paramagnetic liquid in which the objects are suspended. Absent external forcing, objects levitating in the device adopt predictable static orientations; the orientation depends on the shape and distribution of mass within the objects. The orientation of objects of uniform density in the MagLev device shows a sharp geometry-dependent transition: an analytical theory rationalizes this transition and predicts the orientation of objects in the MagLev device. Manipulation of the orientation of the levitating objects in space is achieved in two ways: (i) by rotating and/or translating the MagLev device while the objects are suspended in the paramagnetic solution between the magnets; (ii) by moving a small external magnet close to the levitating objects while keeping the device stationary. Unlike mechanical agitation or robotic selection, orienting using MagLev is possible for objects having a range of different physical characteristics (e.g., different shapes, sizes, and mechanical properties from hard polymers to gels and fluids). MagLev thus has the potential to be useful for sorting and positioning components in 3D space, orienting objects for assembly, constructing noncontact devices, and assembling objects composed of soft materials such as hydrogels, elastomers, and jammed granular media.eveloping new techniques to manipulate and orient components is part of the developing field of advanced manufacturing. Procedures for orienting hard objects reliably in three dimensions (3D) are essential for many existing manufacturing processes and relevant to a range of applications in other areas (1). Examples include operating automated manufacturing lines, sorting and prepositioning components for assembly, and inspecting parts for quality control. Components in assembly lines often have random orientations, and they must be oriented properly before assembly (2-4). Advanced and "next-generation" approaches based on biomimetic (5-8) and soft robotic (9) strategies, and hierarchically organized, self-assembled, and stimulus-responsive materials (10-15) particularly require methods capable of orienting and assembling soft, sticky, and easily damaged materials. Few methods exist to manipulate these types of materials without damaging them.One way of orienting hard objects is to agitate them mechanically, and to allow them to fit (or fall) into openings of complementary shape (2); for appropriate geometries, a correct fit ensures that the object is appropriately oriented and can be transported to the next process. The disadvantages of this method are that it can be slow, and that it is not suitable for objects that are soft, fragile, or sticky. Most importantly, it is only reliable for objects of anisotropic shape: that is, it fails for objects that have only slightly asymmetrical shapes or sizes (16,17)....