The aim of this study is to characterise the liquid oil produced from pyrolysis of waste tyre. In this study, a series of experiment were carried out at various process temperature from 300 °C to 500 °C. The degradation study was carried out by using TGA, meanwhile the pyrolysis process was done using a fixed bed reactor. Liquid oil obtained from the pyrolysis was analysed using FTIR and GC-MS. The oil yield was found to decrease with increasing final pyrolysis temperature and the yield of the gas increased. The highest oil yield was 58.3 wt. %. For pyrolysis at 400 °C. The pyrolysis of waste tyre at atmospheric pressure commenced at about 340 °C and completed at 460 °C. An increase in the aromatic content of the oil was observed with increasing temperature. However, the aliphatic content decreased as the temperature increased from 300 °C to 500 °C. It was observed that the amount of aliphatic fraction in the oil decreased from 7.8 wt. % to 5.4 wt. %. In the meantime, the number of aromatic compounds increased from 37.4 wt. % to 51.2 wt. %. The main aromatic compounds were limonene, xylene, styrene, toluene, trimethylbenzene, ethylbenzene and benzene.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.