No abstract

Landfill leachate, especially when produced in old municipal solid waste landfills, is a challenging type of wastewater which contains a variety of toxic substances. The existence of pollutants in the landfill leachate is primarily due to inadequate solid waste separation at the source. Pretreatment on site is a must for the landfill leachate to be safely released into the environment. One-step treatment is insufficient since landfill leachate has a complex composition that spatially and temporally varies. Often, the landfill leachate and municipal wastewater are treated together. Biological treatment is a routine technique which is applied to landfill leachate less than five years old. The concentration of easily biodegradable organic matter in the young landfill leachate declines with time and, as a result, the application of physical and chemical treatment processes is required. The goal of the current work is to investigate the usefulness and capability of the most efficient and widely available technique/s for landfill leachate treatment, to identify the main challenges and strengths of each technology and seek the optimum solution.

This study aims to examine the scaling and performance of flat sheet aquaporin FO membranes in the presence of calcium salts. Experiments showed that the application of calcium sulphate (CaSO4) resulted in an 8–78% decline in the water flux. An increase in the cross-flow velocity from 3 to 12 cm/s reduced the decline in the flux by 16%. The deposition of salt crystals on the membrane surface led to the alteration in the membrane’s intrinsic properties. Microscopy, attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, and X-Ray fluorescence (XRF) analyses confirmed measurements of the zeta potential and contact angle. The use of a three-salt mixture yielded severe scaling as compared with the application of calcium sulphate dehydrate (CaSO4 × 2H2O), i.e., a result of two different crystallisation mechanisms. We found that the amount of sodium chloride (NaCl), saturation index, cross-flow velocity, and flow regime all play an important role in the scaling of aquaporin FO flat sheet membranes.