RESUMOTradicionalmente, a maior parte dos estudos utiliza modelos lineares para o ajuste da relação hipsométrica, tendo o diâmetro a 1,30 m do solo (DAP) como única variável independente. Entretanto, sabe-se que a linearidade não caracteriza fielmente o crescimento biológico e que outras variáveis relativas ao povoamento, ou às árvores individuais, exercem influência sobre o crescimento em altura. O objetivo deste trabalho foi avaliar o desempenho de modelos lineares e não lineares no ajuste da relação hipsométrica de duas espécies de Pinus tropicais, bem como verificar o efeito da adição de covariantes na estimativa dos parâmetros destes modelos. Os dados utilizados provêm de plantios de Pinus caribaea var. hondurensis e Pinus oocarpa, com diferentes idades e localizados em áreas com diferentes índices de sítio, nos municípios de Nova Ponte e Indianópolis, estado de Minas Gerais. Modelos lineares e não lineares foram ajustados em suas formas originais e com a inclusão das covariáveis idade, sítio e espécie nas estimativas de cada parâmetro dos modelos. Os modelos foram comparados por meio dos critérios estatísticos: erro padrão da estimativa (S yx ), Critério de Informação de Akaike (AIC), Critério de Informação Bayesiano (BIC) e também pela análise gráfica de resíduos padronizados. Constatou-se que modelos não lineares demonstram maior capacidade de descrever o comportamento da variável altura, e que a inclusão das covariáveis tornou superior a qualidade dos ajustes, considerando os critérios estatísticos de precisão adotados. Palavras-chave: curvas h/d; pinus tropicais; relação altura-diâmetro; covariáveis. ABSTRACTTraditionally, most studies use linear models to adjust the hypsometric relationship using diameter at breast height (DBH) as the only independent variable. However, it is known that the linearity does not characterizes faithfully biological growth and other variables related to forest stand, or individual trees, influence in height growth. The aim of this study was to evaluate linear and nonlinear models' performance for hypsometric relationship of two tropical pine species, as well as the effect of covariates adding in models' parameters estimation. The data used provided from Pinus caribaea var. hondurensis and Pinus oocarpa stands, with different ages and site index, located in the counties of Nova Ponte and Indianápolis, Minas Gerais state. Linear and nonlinear models were fitted in its original form and including the covariates age, site index and species in the estimation of each models' parameter. The models were compared using the following statistical criteria: residual standard error (Syx), Akaike Information Criteria (AIC), Bayesian Information Criteria (BIC) and
RESUMO:Existem importantes fatores ambientais que afetam diretamente a taxa de crescimento das espécies florestais, que podem provocar alterações em suas propriedades e, por sua vez, afetar a densidade da madeira. Como a ocorrência das diferentes fitofisionomias está relacionada a fatores ambientais característicos, neste trabalho, objetivou-se verificar o comportamento geral da densidade da madeira das espécies arbóreas nativas, frente a essas diferentes condições de crescimento no estado de Minas Gerais. Os dados de cubagem rigorosa das árvores foram obtidos do Inventário Florestal de Minas Gerais. Foram utilizados dados de 1988 árvores nas diversas fisionomias florestais. De cada árvore foram retirados cinco discos de madeira nas posições 0, 25, 50, 75 e 100% da altura total. A densidade básica de cada disco foi determinada segundo a norma NBR 7190/1997. As fitofisionomias ombrófila, semidecídua, cerradão, cerrado típico e decídua apresentaram, respectivamente, médias de densidade da madeira de 0,502; 0,561; 0,585; 0,612 e 0,675 g.cm -3 , todas estatisticamente distintas. Foi encontrada uma relação clara e coerente da densidade da madeira com as características edafoclimáticas que condicionam as diferentes fitofisionomias no estado de Minas Gerais. As fisionomias florestais apresentam condições ambientais tão características, que afetam a composição florística e, também, a atividade fisiológica e cambial das plantas, ocasionando densidades da madeira próprias às formações florestais.Palavras-chave: Densidade básica, fisionomia florestal, Inventário Florestal de Minas Gerais. ENVIRONMENT EFFECTS ON WOOD DENSITY OF VEGETATION TYPES IN MINAS GERAIS STATE -BRAZIL INTRODUÇÃOFatores ambientais influenciam a variabilidade da madeira, uma vez que afetam a taxa de crescimento das espécies florestais (RIGATTO et al., 2004). O efeito no crescimento está relacionado ao impacto sobre o período vegetativo e aos processos fisiológicos das plantas (ANTONOVA; STASOVA, 1997). Como resposta, as árvores adaptam seus processos fisiológicos de acordo com as condições ambientais, com reflexo na atividade cambial e na anatomia do lenho (VILLAR et al., 1997). Como a densidade da madeira é resultado da combinação da quantidade e da distribuição dos diferentes elementos anatômicos (ROQUE; TOMAZELLO FILHO, 2009), as variações edafoclimáticas, certamente, irão afetá-la de alguma maneira.
Cerambicídeos que promovem a queda de galhos ou fustes podem causar danos a diversas espécies florestais, sejam em plantios econômicos ou mesmo em árvores utilizadas em arborização. O cerambicídeo Coccoderus novempunctatus é um destes agentes. O dano realizado pela larva propicia a queda de ramos de muitas espécies florestais e, no caso ora avaliado, em fustes de Cassia siamea ou parte destes. Esta é uma espécie florestal utilizada em arborização e recuperação de áreas perturbadas ecologicamente. O trabalho teve o objetivo de diagnosticar os danos de C. novempunctatus em C. siamea, através da diagnose das lesões e da quantificação do volume de madeira dos fustes por ele seccionados. Cinco parcelas foram demarcadas em mata secundária, onde a atuação do inseto havia sido registrada. Os fustes de C. siamea, cortados pelo inseto, tiveram seu diâmetro no ponto da secção mensurado bem como o comprimento total. Os volumes de madeira foram calculados utilizando-se o método de Smalian. O diâmetro médio no ponto da secção e o comprimento médio de fustes de C. siamea, cortados por C. novempunctatus foi 9,07 cm e 6,31 m, respectivamente. O volume médio de madeira, destes fustes, com casca e sem casca foi 0,0261 e 0,0218 m³, respectivamente.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.