In this study, experiments were carried out to evaluate a direct nanofiltration membrane process performance in terms of flux, rejection, and resistance to fouling, for treating two real textile dyeing rinsing waters (indigo blue and sulfur black) collected from rinsing baths of Ksar Hellal factory (SITEX). Based on permeate flux efficiencies and regarding permeate quality in terms of pollutant rejections, indigo blue permeate presented better performances than sulfur black. During volume reduction factor experiments, an average of 99% reduction in turbidity, 97% in COD removal, and a colorless permeate were observed in the case of indigo blue, whereas for sulfur black permeate, these rejections values reached only 67, 86, and 52%, respectively, in terms of turbidity, COD and color removal efficiencies. However, low salt rejection rates were obtained that did not exceed 34% for both rinsing effluents. These results confirm the fouling problem of NF HL membrane; even it presented a significant improvement in permeate quality. The fouling influence after NF stage was evaluated by determining resistances in series. Nevertheless, NF HL membrane seemed to be more sensitive to fouling caused by treating sulfur black effluent. Moreover, the irreversible fouling was more important than the reversible one, for both studied samples.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.