No abstract

No abstract

This paper presents an analytical technique that can be used for calculating the contribution to the end-winding leakage inductance of a switched reluctance machine due to the current in the end winding itself. It is based on a 3D geometric model of the end winding region. Each coil herein is modelled as a set of serially connected straight filaments. The mutual inductance of the end coils is calculated by the solution of the Neumann integral. By using the method of images the influence of the core iron on the end winding leakage inductance is considered, too. The contribution due to axial leakage of the air-gap field is not focused on in this paper.

In the proposed paper the transient interaction between periodic incoming wakes and the laminar separation bubble located on the rear suction surface of a typical, highly loaded LPT blade is investigated by means of highly resolved large-eddy simulations. An annular, large scale, 1.5-stage LPT test-rig, equipped with a modified T106 turbine blading and an upstream rotating vortex generator is considered and the numerical predictions are compared against hot film array measurements. In order to accurately assess both baseline transition and wake impact, simulations were conducted with unperturbed and periodically perturbed inflow conditions. Main mechanisms of transition and wake-boundary layer interaction are investigated utilizing a frequency-time domain analysis. Finally visualizations of the main flow structures and shear layer instabilities are provided utilizing the q-criterion as well as the finite-time Lyapunov exponent.

In this work, we present the results of the numerical investigations of periodic wake–secondary flow interaction carried out on a low pressure turbine (LPT) equipped with modified T106-profile blades. The numerical predictions obtained by means of unsteady Reynolds-averaged Navier–Stokes (URANS) simulations using a k-ω-model have been compared with measurements conducted in the same configuration and showed a good agreement. Based on the verified numerical data, the Q-criterion has been employed to characterize the secondary flow structures and accurately identify their origin. An analysis of the fundamental wake kinematics and the unsteady vortex migration revealed dominant interaction mechanisms such as the circumferential fluctuation of the pressure side horseshoe vortex (HSV) and its direct interaction with the passage vortex (PV) and the concentrated shed vortex (CSV). Finally, a correlation with the total pressure loss coefficient is provided and a link to the incoming wake structures is given.