Zeólita A e hidroxisodalita foram sintetizadas a partir de um rejeito industrial do processo de beneficiamento de caulim para papel, de indústrias da região amazônica. Esse rejeito é composto essencialmente por caulinita e possui razão SiO2/Al2O3 igual à requerida para esses dois tipos de zeólitas. Dessa maneira, o processo de síntese passou por duas etapas: primeiramente o caulim foi submetido ao tratamento térmico, através de calcinação a 700 °C por 2 h, para transformação de caulinita em metacaulinita. A metacaulinita obtida reagiu com NaOH em solução, em condições hidrotermais, através de autoclavagem estática, nas temperaturas de 80, 110 e 150 °C por 24 h. Os materiais de partida foram identificados e caracterizados por difração de raios X (DRX) e microscopia eletrônica de varredura (MEV) e os produtos sintetizados, por meio de DRX, MEV, análises térmica diferencial e termogravimétrica, e espectroscopia de infravermelho. No processo realizado a 150 ºC foi obtida uma mistura de zeólita A e hidroxisodalita. A 110 ºC houve a formação de zeólita A. Contudo, na menor temperatura de síntese (80 °C) não houve formação de material cristalino para as condições do processo estabelecidas.
AB ST R ACT : Production of kaolin for the paper-coating industry in the Brazilian Amazon region generates large amounts of waste, most of which is kaolinite. It is known that such materials can be used to synthesize zeolites. The use of kaolin waste for zeolite synthesis could, in principle, help social and economic development while providing valuable materials for industry. Additionally, there is a significant environmental appeal if such wastes could be used instead of new raw materials.This study focused on the production of zeolite A. Samples of the raw material were first calcined (700ºC/2h) to obtain metakaolinite for further reaction with NaOH solution. Different parameters were evaluated to optimize the synthesis conditions of zeolite A. The results showed that zeolite A with a large degree of structural order was generally obtained as the only zeolitic product. The following synthesis conditions were used: temperature 110ºC, time 24 h and a Na/Al ratio of 1.36. Hydroxysodalite was also obtained under specific conditions.
Zeólita A foi calcinada nas temperaturas de 200, 400, 600, 800 e 1000 °C/2 h para estudar sua estabilidade térmica. A síntese foi feita a partir de um rejeito de beneficiamento de caulim para a produção de papel de uma empresa mineradora localizada na região Amazônica. A caracterização da zeólita A calcinada nas diferentes temperaturas foi realizada por difração de raios X e microscopia eletrônica de varredura. A zeólita A permaneceu estável até 600 °C, havendo apenas variações nas intensidades dos picos em função da temperatura. A 800 °C o padrão de difração apresentado pelo material continuava sendo da zeólita A mas com ausência de alguns picos. A 1000 °C foi constatado que o produto de calcinação era constituído de nefelina, mulita e provavelmente sodalita. Essa zeólita também foi aquecida em mais duas temperaturas, 900 e 950 °C, com o objetivo de confirmar os dois picos exotérmicos observados em curva de análise térmica diferencial. Os produtos de calcinação nessas temperaturas eram constituídos de nefelina, sodalita e mulita.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.