No abstract

No abstract

Broiler chicks from one incubator hatch within long periods of time, which leads to dehydration and reduction in yolk sac reserves of those chicks that have hatched earlier and potentially impairs early performance. The present research investigated the hatching distribution at intervals of incubation using eggs of different weights within one breeder age or eggs from widely different breeder ages. Eggs from breeders at 27 and 59 weeks of age (54 and 69 g) and from breeders at 40 weeks of age, which were graded as light (58 g) and heavy (73 g), were placed in a commercial incubator. There were a total of 1,184 eggs distributed in four treatments and eight replicates: eggs from 27-week-old breeders (27B), eggs from 59-week-old breeders (59B), light eggs from 40-week-old breeders (40BL) and heavy eggs from 40-weekold breeders (40BH). Replicates were comprised of 37 eggs that were placed in each incubator tray. The treatments were physically separated from each other using a plate. Eggs were transferred to a hatcher after 432 hours of incubation and the first chick hatched at 449 hours of incubation. Afterwards, the number of completely hatched chicks from each replicate was recorded at six-hour intervals until 503 hours of incubation, when the hatchings stopped. Hatched chicks were removed from the trays after each measurement. Data were submitted to an analysis of variance with repeated measures. There was a significant interaction between breeder age and incubation length. The hatching onset of eggs from the old breeders was later compared to young breeders. Hatchability (%incubated eggs) was lower for the old breeders; however, differences in hatchability as a percentage of the hatched eggs were not so evident. Complete hatchability occurred only at 503 hours of incubation; however, more than 90% eggs had hatched 18 hours earlier.

The objective of this experiment was to investigate the effects of different particle sizes, expressed as Geometric Mean Diameter (GMD) of corn (0.336mm, 0.585mm, 0.856mm and 1.12mm) of mash and pelleted broiler chicken diets on the weight of the gizzard, duodenum and jejunum+ileum; on the pH of the gizzard and small intestine and on the characteristics of the duodenal mucous layer (number and height of villi and crypt depth) in 42-day-old broilers. The physical form and the particle size of the diet had no significant effect on gizzard and intestine pH (p > 0.05). A greater gizzard weight was seen in the birds receiving pelleted diet and particle size of 0.336mm (p ≤ 0.008). However, for the particle sizes of 0.856 and 1.12 mm, a greater weight was found in birds that received mash diet (p ≤ 0.039 and p ≤ 0.006, respectively). Also, gizzard weight was greater with increasing corn GMD independent of the physical form of the diet. In the mash diet, the increase in particle size promoted a quadratic response in the weight of duodenum and jejunum + ileum. The pelleted diet promoted a greater number of villi per transverse duodenum cut (p ≤ 0.007) and greater crypt depth (p < 0.05). As the particle size increased, there was a linear increase of villus height and crypt depth in the duodenum, irrespective of the physical form of the diet.

Este experimento foi realizado com o objetivo de investigar os efeitos de diferentes granulometrias, expressa em Diâmetro Geométrico Médio (DGM) do milho (0,336mm, 0,585mm, 0,856 mm e 1,12 mm) de dietas fornecidas na forma farelada (FAR) e peletizada (PEL), no desempenho e no rendimento de carcaça e de cortes de frangos de corte de 21 a 42 dias de idade. Dietas FAR, produzidas com DGM de 0,336 mm resultaram em um menor consumo (p<0,001), ganho de peso (p<0,001) e pior conversão alimentar (p<0,001) do que as PEL de mesmo DGM. Os demais DGM não mostraram diferenças entre ração FAR e PEL. Quando avaliada somente a granulometria, observou-se que o aumento no DGM melhorou o ganho de peso linearmente e de forma quadrática o consumo e a conversão alimentar. Não houve influência da forma física ou DGM em rendimento de carcaça e rendimento de perna+coxa. Porém foi verificada uma redução em rendimento de peito com DGM 0,336 mm (p<0,001), na forma FAR.

The aim of this work was to study the effect of UV-C radiation on ultrasound assisted extraction (UAE) of cherry tomato bioactive compounds. Cherry tomatoes were exposed to two UV-C radiation doses (0.5 and 1.0 J cm-²) and stored at 20 ± 0.5 °C for 7 days. Next, they were lyophilized, and the bioactive compounds were extracted by UAE at 20 KHz. To evaluate the effectiveness of the extraction process of the bioactive compounds, a CCRD (central composite rotational design) was used together with RSM (response surface methodology), for extraction times from 4 to 12 minutes and concentrations (g of lyophilized product / L of ethanol) of 1:10, 1:20 and 1:30. The extracts obtained from the irradiated tomatoes presented 5.8 times more lycopene content than the controls and higher antioxidant activity was obtained for 4 and 8 min, in the concentrations 1:10 and 1:20 (m v-1). Trough numerical model optimization, optimal extraction conditions were obtained. The results demonstrated that by previously irradiating tomatoes with UV-C, the UAE yielded considerably higher amounts of lycopene and other bioactives.

The nutritional composition and productivity of halophytes is strongly related to the biotic/abiotic stress to which these extremophile salt tolerant plants are subjected during their cultivation cycle. In this study, two commercial halophyte species (Inula crithmoides and Mesembryanthemum nodiflorum) were cultivated at six levels of salinity using a soilless cultivation system. In this way, it was possible to understand the response mechanisms of these halophytes to salt stress. The relative productivity decreased from the salinities of 110 and 200 mmol L−1 upwards for I. crithmoides and M. nodiflorum, respectively. Nonetheless, the nutritional profile for human consumption remained balanced. In general, I. crithmoides vitamin (B1 and B6) contents were significantly higher than those of M. nodiflorum. For both species, β-carotene and lutein were induced by salinity, possibly as a response to oxidative stress. Phenolic compounds were more abundant in plants cultivated at lower salinities, while the antioxidant activity increased as a response to salt stress. Sensory characteristics were evaluated by a panel of culinary chefs showing a preference for plants grown at the salt concentration of 350 mmol L−1. In summary, salinity stress was effective in boosting important nutritional components in these species, and the soilless system promotes the sustainable and safe production of halophyte plants for human consumption.

Waste of Salicornia ramosissima a halophyte plant used in gourmet cuisine, can be valorized after being dried and milled, becoming a vegetable salt, a healthier replacer of kitchen salt due to its lower sodium content (around 10‐fold less) but still maintaining an intense salty taste. To study the shelf life of this vegetable salt from S. ramosissima, packed in a cylindrical aluminum box, an accelerated shelf‐life testing (ASLT) was first carried out at 35, 40, 45, and 50°C by monitoring color, moisture, and water activity (aw) throughout the storage period. Moisture and aw decreased at increasing temperature, but the color was not affected. The moisture sorption isotherms (MSIs) were next produced at 15, 25, 35, and 45°C and relative humidity (RH: 6.5%–80%) using the static gravimetric method. Several mathematical models were tested to fit the MSI experimental data and finally the Oswin model was used to predict the moisture content. With this model, the isosteric heat was determined. A mass–balance model was used to predict shelf life and the equilibrium moisture content (Me) during storage based on predetermined MSI and water vapor rate transmission (WVTR) data. The predicted shelf life of the package with and without adhesive tape around the lid was 35 and 80 days (25°C, 75% RH) and 19 and 63 days (35°C, 90% RH), respectively. Practical Applications By understanding the moisture sorption phenomenon in hygroscopic powders, this study can provide valuable data to the food industry dealing with such products. Being a microbiologically safe product due to its low aw and having color stabilized through previous drying, its mode of failure during storage proved to be the loss of its free‐flowing capacity. A methodology to evaluate the shelf life of this hygroscopic product packed in a cylindrical aluminum box is described. There is a need to draw attention to the fact that, despite aluminum with a thickness of .23 mm is a very effective barrier to water vapor penetration, such package has an extremely small gap between the lid and body, which is hard to measure, yet allows water vapor to flow through the package at a rate that results in its shelf life being less than 3 months. Ways to overcome this issue are suggested.