Increase of the ambient air temperature in cities caused by the urban heat island phenomenon has a seri- ous impact on the economic and social system of cities. to counterbalance the consequences of the increased urban temperatures important research has been carried out resulting in the development of efficient mitigation technologies. the present paper aims to present the state of the art in terms of local climate change and urban heat island mitigation techniques. In particular, developments in the field on highly reflective materials, cool and green roofs, cool pavements, urban green and of other mitigation technologies are presented in detail, while examples of implemented projects are given.

Urban greenery is a natural solution to cool cities and provide comfort, clean air and significant social, health and economic benefits. This paper aims to present the latest progress on the field of greenery urban mitigation techniques including aspects related to the theoretical and experimental assessment of the greenery cooling potential, the impact on urban vegetation on energy, health and comfort and the acquired knowledge on the best integration of the various types of greenery in the urban frame. Also to present the recent knowledge on the impact of climate change on the cooling performance of urban vegetation and investigate and analyse possible technological solutions to face the impact of high ambient temperatures.

Urban areas usually experience higher temperatures when compared to their rural surroundings. Several studies underlined that specific urban conditions are strictly connected with the Urban heat island (UHI) phenomenon, which consists in the environmental overheating related to anthropic activities. As a matter of fact, urban areas, characterized by massive constructions that reduce local vegetation coverage, are subject to the absorption of a great amount of solar radiation (short wave) which is only partially released into the atmosphere by radiation in the thermal infrared (long wave). On the contrary, green areas and rural environments in general show a reduced UHI effect, that is lower air temperatures, due to evapo-transpiration fluxes. Several studies demonstrate that urban microclimate affects buildings’ energy consumption and calculations based on typical meteorological year could misestimate their actual energy consumption. In this study, two different sets of meteorological data are used for the calculation of the heating and cooling energy needs of an existing university building. The building is modeled using TRNSYS v.17 software. The first set of data was collected by a weather station located in the city center of Modena, while the second set of data was collected by another station, located in the surrounding area of the city, near to the studied building. The influence of the different meteorological situations described by the two weather stations are analyzed and assumed to be representative of the UHI effect. Furthermore, the effects of UHI mitigation strategies on the building energy needs are evaluated and discussed

Abstract:Overheating of buildings and urban areas is a more and more severe issue in view of global warming combined with increasing urbanization. The thermal behavior of urban surfaces in the hot seasons is the result of a complex balance of construction and environmental parameters such as insulation level, thermal mass, shielding, and solar reflective capability on one side, and ambient conditions on the other side. Regulations makers and the construction industry have favored the use of parameters that allow the forecasting of the interaction between different material properties without the need for complex analyses. Among these, the solar reflectance index (SRI) takes into account solar reflectance and thermal emittance to predict the thermal behavior of a surface subjected to solar radiation through a physically rigorous mathematical procedure that considers assigned air and sky temperatures, peak solar irradiance, and wind velocity. The correlation of SRI with the heat released to the urban environment is analyzed in this paper, as well as the sensitivity of its calculation procedure to variation of the input parameters, as possibly induced by the measurement methods used or by the material ageing.