An asymmetric, reciprocal, diffraction-free transmission of linearly polarized waves in a new diodelike, three-layer, ultrathin, chiral structure is studied theoretically and experimentally. The exploited physical mechanism is based on the maximization of the cross-polarized transmission in one direction due to the polarization selectivity dictated by the peculiar eigenstate combination, which is efficiently controlled by the electromagnetic tunneling through the metallic subwavelength mesh sandwiched between these layers. Simulation and microwave experiment results demonstrate a nearly total intensity transmission at normal incidence in one direction and a small intensity transmission in the opposite direction.

An asymmetric chiral metamaterial structure is constructed by using four double-layered U-shaped split ring resonators, which are each rotated by 90° with respect to their neighbors. The peculiarity of the suggested design is that the sizes of the electrically and magnetically excited rings are different, which allows for equalizing the orthogonal components of the electric field at the output interface with a 90° phase difference when the periodic structure is illuminated by an x-polarized wave. As a result, left-hand circular polarization and right-hand circular polarization are obtained in transmission at 5.1 GHz and 6.4 GHz, respectively. The experiment results are in good agreement with the numerical results.

An electrically thin chiral metamaterial structure composed of four U-shaped split ring resonator pairs is utilized in order to realize polarization rotation that is dependent on the polarization of the incident wave at 6.2 GHz. The structure is optimized such that a plane wave that is linearly polarized at an arbitrary angle is an eigenwave of the system at this frequency. The analytical relation between the incident polarization and the polarization rotation is derived using transmission matrices. Furthermore, the proposed structure exhibits an asymmetric transmission of linearly polarized waves at 6.2 GHz. Plane waves traveling in opposite but perpendicular directions to the material plane are rotated by different angles. On the other hand, four incident polarization angles have been found for the same structure, at which the transmission is symmetric. The experiment results are in good agreement with the numerical results.

We report numerical and experimental investigations of asymmetric light propagation in a newly designed photonic structure that is formed by creating a chirped photonic crystal (PC) waveguide. The use of a non-symmetric distribution of unit cells of PC ensures the obtaining of asymmetric light propagation. Properly designing the spatial modulation of a PC waveguide inherently modifies the band structure. That in turn induces asymmetry for the light's followed path. The investigation of the transmission characteristics of this structure reveals optical diode like transmission behavior. The amount of power collected at the output of the waveguide centerline is different for the forward and backward propagation directions in the designed configuration. The advantageous properties of the proposed approach are the linear optic concept, compact configuration and compatibility with the integrated photonics. These features are expected to hold great potential for implementing practical optical rectifier-type devices.

A circular polarizer, which is composed of periodic and two-dimensional dielectric high-contrast gratings, is designed theoretically such that a unity conversion efficiency is achieved at λ(0)=1.55 μm. The operation is obtained by the achievement of the simultaneous unity transmission of transverse magnetic and transverse electric waves with a phase difference of π/2, meaning that an optimized geometrical anisotropy is accomplished. By the utilization of the rigorous coupled-wave analysis and finite-difference time-domain methods, it is shown that a percent bandwidth of ∼50% can be achieved when the operation bandwidth is defined as the wavelengths for which the conversion efficiency exceeds 0.9.