The 3D printing process is a kind of additive manufacturing, that the basic principle of this process is adding material layer by layer to form a product. The purpose of this research was to study tensile properties of 3D printing ABS (Acrylonitrile Butadiene Styrene) material with axial and lateral direction. The specimen was printed according to ASTM D 632-02 by layer thickness variation around 0.1 mm, 0.2 mm and 0.3 mm. Moreover, three specimens were made for each printing axial and lateral direction. Tensile test was performed using Zwick Roell Series Z 021 machine. Then, the fracture surface was studied by SEM testing used ZEOL JSM-6510LA. Based on the research from 6 variation layer of 3D printing, the optimal result was found on the axial direction of 0.3 mm thickness layer with tensile strength 30.60 MPa and able to receive maximum load 551.13 N. The lateral direction of 0.3 mm thickness layer has tensile strength 19.42 MPa and able to receive maximum load 349.12 N. The voids were seen at the fracture surface of specimen.
<p>Since long ago, Javanese ethnics were strongly related to mysticism. The people believed in the unseen which is out of human’s sense. That belief grew so fast. Hence, animism and dynamism become the first belief of Javanese at that time. When Islam first entered in the Javanese land in 14<sup>th</sup> century, the locals had believed in some sects, those are Hindu, Brahma, and Buddha. Those brought Islam into Java Island had so many works to do. It is not easy since the locals are quite fanatic with their mysticism. Islam, in progress, got positive response from the Javanese people proven by the number of Moslem at that time. Nevertheless, their ancestors’ ritual tradition still remained in the life of those Moslem. This is what makes Javanese Islam becomes the attracting topic for the cultural researchers. This article discusses all about Islam specifically in its spread history in Javanese Island starting from <em>da’wah</em> process to Islamic lesson which is related to Javanese philosophy. It also discusses about how the Islam conveyors tolerated with so many mystic beliefs and slowly changed those from the people.</p><p> </p><p>Sejak zaman dahulu, mistik dan suku Jawa sangat terkait erat. Penduduk sangat mempercayai hal gaib yang di luar nalar manusia. Kepercayaan tersebut sangat berkembang pesat. Karenanya, animisme dan dinamisme menjadi keyakinan asli penduduk suku Jawa pada masa itu. Saat Islam masuk ke tanah Jawa di abad 14, penduduk setempat telah meyakini beberapa sekte lain, yakni Hindu, Brahma, dan Budha. Tentu banyak sekali hal yang harus dilakukan bagi pembawa Islam ke tanah Jawa. Tak mudah karena penduduk masa itu sangat fanatik dengan keyakinan mistik mereka. Dalam perkembangannya, Islam mendapat respon positif dari penduduk Jawa terbukti dari banyaknya jumlah Muslim masa itu. Namun, masih banyak sekali muslim yang masih berpegang teguh pada tradisi ritual nenek moyang mereka. Hal ini menjadikan Islam Jawa menjadi pembahasan menarik bagi para peneliti budaya. Artikel ini membahas serba-serbi Islam dan penyebarannya di tanah Jawa. Mulai dari proses dakwah hingga ajaran Islam yang dikaitkan dengan falsafah Jawa. Bagaimana para penyebar Islam harus bertoleransi dengan berbagai ajaran mistis dan mengubah sedikit demi sedikit kepercayaan penduduknya.</p>
Surface roughness of ABS material on FDM process due to different orientation angle and layer thickness are investigated using an experimental method. The aim of this paper is to determine the effect of orientation angle and layer thickness on surface roughness on 3-dimension FDM printing on ABS material. A rectangle model with 60 mm length,10 mm in width, and 10 mm in height is used in this research. The orientation angle of model is 30, 45, and 60 degrees in layer thickness of 0.15 mm and 0.25 mm. The results indicates that the different orientation angle of the layer thickness causes the roughness value of the printed surface. The roughness surface value increases along with increasing of the orientation angle. The highest surface roughness value occurs at 60 degrees orientation angle in 0.15 mm layer thickness.
Tujuan penelitian untuk mendisain mesin pencacah gelas plastik dengan penggerak manual, serta mengujikinerjanya. Penelitian ini menggunakan metode VDI 2221 yaitu metode untuk menyelesaikan permasalahandan mengoptimalkan penggunaan material, teknologi dan keadaan ekonomi. Metode ini diharapkan dapatmempermudah perancang untuk menguasai sistem perancangan tanpa harus menguasai secara detail.Kesimpulan dari penelitian ini adalah peneliti berhasil merancang mesin pencacah gelas plastik dengan bentukyang optimal dan minimalis, kecepatan pemotongan ( 0,012 m/s ) dan pemipihan ( 0,01 m/s ). Diameter porosditentukan oleh tegangan geser pemipih ( 5,09 Kg/mm2 ) dan tegangan geser pisau ( 18,8 Kg/mm2 ) sehinggadidapatkan hasil 12 mm. Daya yang dibutuhkan pada mesin ini sebesar 0,05 kW dan transmisi yang digunakanpada mesin ini yaitu penggunaan roda gigi yang dihubungkan rantai. Hasil pengujian mesin pemotong gelasplastik dapat memotong 0,864 kg dalam waktu 1 jam dengan kebisingan maksimum hanya 70,3 db, dimanahasil ukuran cacahan atau serpihan berkisar ukuran 4 mm x 4 mm, ukuran tersebut yang dapat dijual diperusahaan daur ulang plastik.
Harga BBM dan LPG yang semakin mahal, mendorong manusia untuk mencari alternatif energi yang tidak dapat diperbaharui tersebut. Salah satu solusinya adalah briket, karena mudah pembuatannya. Pada penelitian ini dilakukan pembuatan briket dengan bahan baku eceng gondok dan sampah plastik HDPE yang memiliki nilai kalor yang tinggi. Selain sebagai energi alternatif, briket ini nantinya diharapkan dapat menjadi solusi lingkungan dari eceng gondok yang dikenal sebagai tanaman pengganggu dan masalah sampah plastik yang sulit diterbiodegradasi di alam . Karakterisasi yang dilakukan meliputi pengujian air total (ASTM D.3302-10), pengujian kadar air lembab (ASTM D.3173-08), pengujian kadar abu briket (ASTM D.3174-04), dan pengujian nilai kalor (ASTM D. 5865-10). Hasil yang diperoleh di dapat sampel dengan komposisi 20% arang eceng gondok dan 80% sampah plastik HDPE memberikan hasil yang terbaik.
This study aims to determine the compression strength of the Fused Deposition Material (FDM) additive manufacturing with the parameters in different layer thicknesses between 0.10 – 0.35 mm. The specimen manufacturing process refers to ASTM D695 Standards with ABS (acrylonitrile butadiene styrene) and PLA (polylactic acid) materials. Based on the test results, the highest compression strength is found in 0.15 mm layer thickness PLA material with a yield strength value of 66.78 MPa. The lowest compression strength is found in 0.35 mm of layer thickness ABS material with a yield strength value of 33.41 MPa. The value of compression strength on ABS and PLA materials varies with each layer thickness change.
Substantially, the core of religious belief is believing God as being transcendental, sacred, pure, above everything PendahuluanAgama menampilkan banyak wajah. Ia yang asalnya satu bisa berwujud aktivitas beragam yang menggiring pada kerukunan clan harmonitas sosial bila pemeluknya "mengerti" agama clan menyadari keberadaannya sebagai bagian dari masyarakat. Namun agama, kalau dipahami secara absolute sebagai ajaran yang terlepas dari konteks sejarah yang berputar dalam lingkaran tafsir antara bahasa dan pemikiran di penggalan waktu tertentu akan menimbulkan ketakutan clan keresahan
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.